H ow to use washer
Display
3. Completion of washing
• When washing cycle is completed,
“ 
” is displayed on the “Multi display”.
1.Special function display
•When Child lock is selected, the “ 
” is displayed.
•After the end of dry, “ 
” is displayed.
•When time delay is selected, it shows the remaining time before the finish of the selected program.
2.Self diagnose display
•If the washer encounters a fault during operation, the associated fault will be displayed.
“
” : Water pressure sensing error
“
” : Problem of overfilling water
“
” : Door is not closed
“
” : Over load in motor
“
” : Water inlet trouble
“
” : Drainage trouble
“
” : Unbalanced load
“
” : Water temperature trouble
“
” : Dry heater or thermostat trouble.
If these error letters are displayed, please refer to the troubleshooting page31 and follow the guide.
4.Time left
•During washing cycle, the remaining washing time is displayed.
•Recommended program by manufacturer.
-Cotton : around 1hour and 46 minutes
-Cotton Quick : around 1 hour and 10 minutes
-Synthetic : around 1 hour and 31 minutes
-Delicate : around 1 hour and 23 minutes
-Wool : around 1 hour and 4 minutes
-Hand Wash : around 1 hour and 13 minutes
-Duvet : around 1 hour and 38 minutes
-Quick 30 : around 30 minutes
-Baby Care : around 2 hours and 54 minutes
•The washing time may vary by the amount of laundry, water pressure, water temperature and other washing conditions.
•If an unbalanced load is detected or if the suds removing program operates, the wash time may be extended.
(Max. increasing time is 45 minutes.)
24