M aintenance
❋Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock to avoid electrical shock hazards.
❋When disposing of the appliance, cut off the mains cable, and destroy the plug disable the door lock to prevent young children being trapped inside.
The water inlet filter
-" 
" error message will blink on the control panel when water does not enter the detergent drawer.
-If water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3. Clean the filter using a hard bristle brush.
4. Tighten up the inlet hose.
25