General settings — PSM
ENGLISH
Basic procedure
You can change PSM (Preferred Setting Mode) items listed on the table that follows.
1
2Select a PSM item.
3Adjust the PSM item selected.
4Repeat steps 2 and 3 to adjust the other PSM items if necessary.
5Finish the procedure.
Ex.: When you select “AMP GAIN”
Indications | Selectable settings, [reference page] |
DEMO | DEMO ON: [Initial]; Display demonstration will be activated |
Display demonstration | automatically if no operation is done for about |
| 20 seconds, [7]. |
| DEMO OFF: Cancels. |
|
|
CLOCK H | 0 – 23, [7] |
Hour adjustment | [Initial: 0 (0:00)] |
|
|
CLOCK M | 00 – 59, [7] |
Minute adjustment | [Initial: 00 (0:00)] |
|
|
AMP GAIN | You can change the maximum volume level of this receiver. |
Amplifier gain control | LOW PWR: VOL 00 – VOL 30 (Select this if the maximum |
| power of the speaker is less than 50 W to prevent |
| them from damaging the speaker.) |
| HIGH PWR: [Initial]; VOL 00 – VOL 50 |
|
|
14