USING YOUR WASHER
First wash cycle without laundry
Before washing clothes for the first time, fill the HE liquid dispenser cartridge and install in the dispenser drawer. Choose the QUICK WASH cycle and run it without clothes. Use only HE detergent. This initial cycle serves to ensure the interior is clean and the dispenser drawer is ready for use before washing clothes.
1. Sort and prepare your laundry
Sort items by recommended cycle, water temperature, and colorfastness. Separate heavily soiled items from lightly soiled. Separate delicate items from sturdy fabrics. Treat stains promptly and check for colorfastness by testing stain remover products on an inside seam.
IMPORTANT:
nEmpty pockets. Loose change, buttons, or any small object can plug pumps and may require a service call.
nClose zippers, fasten hooks, tie strings and sashes, and remove
nMend rips and tears to avoid further damage to items during washing.
nTurn knits inside out to prevent pilling. Separate
nDo not dry garments if stains remain after washing, because heat can set stains into fabric.
nAlways read and follow fabric care labels and laundry product instructions. Improper usage may cause damage to your garments.
2. Add laundry products (if desired)
NOTE: Do not add clothes to washer drum prior to adding laundry products. Always follow manufacturer’s instructions.
3. Load laundry into washer
Open the washer door. If desired, add
nDepending on load type and cycle, the washer can be fully loaded, but not tightly packed. Washer door should close easily. See “Cycle Guide” for loading suggestions.
nMix large and small items and avoid washing single items. Load evenly.
nWash small items in mesh garment bags. For multiple items, use more than one bag and fill bags equally.
9