Operating instructions
Starting Your Washer
Be sure to measure and add low foaming, automatic washing machine detergent, then place a sorted load in the washer before commencing with the cycle. Detergents should be predissolved when the wash water temperature is less than 40°C.
1. Select a LOAD SIZE | 2. | Select WATER |
TEMPERATURES |
lTurn the knob to point at a setting that describes the size of load you want to wash.
l Set the knob anywhere on or between EX SMALL (a few small items) and EX LARGE (a full load).
lTo change the water level after the washer has started to fill, turn the knob to RESET, then the desired water level.
NOTE: Use the EX LARGE water level for best permanent press results.
0Select wash and rinse water tem- peratures by pushing a button.
0 This drawing shows a warm wash (top temperature) and cold rinse (bottom temperature) selection.
Recommended wash temperatures can be found in your “Laundry Guide”.
LOAD SIZES AND WATER LEVELS
Forbest cleaning | results, | theload |
| CAUTION: |
|
| |
must be able to move freely in the |
|
|
| ||||
| DO NOT |
|
| ||||
water.ToobigaloadortooIittlewater |
|
|
|
| |||
|
| OVERLOAD | WASHER. | ||||
can cause wear or tearing |
|
| |||||
|
|
|
|
| |||
of load | items. |
|
|
| EX LARGE | 82,l | P |
|
|
|
|
| |||
Approximate | e |
| I | MEDIUM 62,1 P |
| ||
| EX SMALL | 450 | P | ||||
fill with | load | I |
| I | |||
|
|
|
| ||||
t!iiE!z
a