Operating instructions
Starting Your Washer
Be sure to measure and add low foaming, automatic washing machine detergent, then place a sorted load in the washer before commencing with the cycle. Detergents should be predissolved when the wash water temperature is less than 40°C.
| 2. | Select WATER |
1. Select a LOAD SIZE | TEMPERATURES |
0Turn the knob to point at a setting that describes the size of load you want to wash.
0 Set the knob anywhere on or between EX SMALL (a few small items) and EX LARGE (a full load).
level for best permanent press
0Select wash and rinse water tem- peratures.
0 This drawing shows a warm wash (top temperature) and cold rinse (bottom temperature) selection.
Recommended wash temperatures can be found in your “Laundry Guide”.
I LOAD SIZES AND WATER LEVELS
I Forbest cleaning results, the load must be able to move freely in the water.ToobigaloadortooIittlewater
can cause wear or tearina of load items.
Approximate fill with load
CAUTIO -
DO NOT
OVERLOAD WASHER.
EX LARGE 82,i !
MEDIUM 62,l P