H ow to use washer
DISPLAY
TIME LEFT
1.Special function display
•When child lock is selected, the
“
” is displayed.
•When time delay is selected, it shows the remaining times to finish the selected program.
2.Self diagnose display
•If the washer encounters a fault during operation, the associated fault will be displayed.
“ 
” : Water pressure sensing error
“ 
” : Problem of overfilling water
“ 
” : Door is not closed
“ 
” : Over load in motor.
“ 
” : Over load in motor.
“ 
” : Water inlet trouble
“ 
” : Drainage trouble
“ 
” : Unbalanced load
“
” : Water temperature trouble
“
” : Dry heater or thermostat trouble
If these error letters are displayed, please refer to the troubleshooting page26 and follow the guide.
3.Completion of washing
•When washing cycle is completed,
“ 
” is displayed on the “Multi display”.
4.Time left
•During washing cycle, the remaining washing time is displayed.
•Recommended program by manufacturer.
[WASH]
-SANITARY : Approx. 1 hour and 37 minutes
-COTTON : Approx. 1 hour and 22 minutes
-PERM. PRESS : Approx. 1 hour and
17minutes
-WOOL/SILK : Approx. 56 minutes
-RINSE+SPIN : Approx. 32 minutes
[WASH/DRY]
-SANITARY : Approx. 4 hours and 46 minutes
-COTTON : Approx. 4 hours and 31 minutes
-PERM. PRESS : Approx. 4 hours and
25minutes
-RINSE+SPIN : Approx. 3 hours and 41 minutes
•The washing time may vary by the amount of laundry, water pressure, water temperature and other washing conditions.
•If an unbalanced load is detected or if the suds removing program operates, the wash time may be extended.
(Max. increasing time is 45minutes.)
19