4.4.6 Adjusting the feet
A CAUTION: In order to ensure that the product operates more silently and
CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
1Loosen the lock nuts on the feet by hand.
2Adjust the feet until the product stands in a stable and balanced way.
3.Tighten all lock nuts by hand again.
4.4.7Electrical connection
Connect the product to a grounded outlet protected by a 13 A fuse. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•Connection must comply with national regulations.
•Power cable plug must be within easy reach after installation.
•If the current value of the fuse or breaker in the house is less than 13 Amps, have a qualified electrician install a 13 Amp fuse.
•The voltage specified in the “Technical specifications” section must be equal to your mains voltage.
•Do not make connections via extension cables or
B warning: Damaged power cables must be replaced by the Authorised Service Agents.
Electrical requirements
Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply.
We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.
Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.
B warning: This appliance must be earthed
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.
Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.
16 / EN | Washing Machine / User’s Manual |