Beko WMG 10454 W user manual 42 / EN, Washing takes longer, Manual, With display, Countdown

Page 42

Problem

Reason

Solution

Washing takes longer

Water pressure is low.

ŠŠMachine waits until taking in adequate

time than specified in the

 

amount of water to prevent poor washing

manual.(*)

 

quality due to the decreased amount

 

of water. Therefore, the washing time

 

 

 

 

extends.

 

Voltage might be low.

ŠŠWashing time is prolonged to avoid poor

 

 

washing results when the supply voltage

 

 

is low.

 

Input temperature of water might be low.

ŠŠRequired time to heat up the water

 

 

extends in cold seasons. Also, washing

 

 

time can be lengthened to avoid poor

 

 

washing results.

 

 

 

 

Number of rinses and/or amount of rinse

ŠŠMachine increases the amount of rinse

 

water might have increased.

water when good rinsing is needed and

 

 

adds an extra rinsing step if necessary.

 

 

 

 

Excessive foam might have occurred and

ŠŠ Use recommended amount of detergent.

 

automatic foam absorption system might have

 

 

been activated due to too much detergent

 

 

usage.

 

 

 

 

Programme time does not

Timer may stop during water intake.

ŠŠTimer indicator will not countdown until

countdown. (On models

 

the machine takes in adequate amount of

with display) (*)

 

water. The machine will wait until there is

 

sufficient amount of water to avoid poor

 

 

 

 

washing results due to lack of water. Timer

 

 

indicator will resume countdown after this.

 

Timer may stop during heating step.

ŠŠTimer indicator will not countdown

 

 

until the machine reaches the selected

 

 

temperature.

 

Timer may stop during spinning step.

ŠŠAutomatic unbalanced load detection

 

 

system might be activated due to the

 

 

unbalanced distribution of the laundry in

 

 

the drum.

Programme time does not

There might be unbalanced load in the

ŠŠAutomatic unbalanced load detection

countdown. (*)

machine.

system might be activated due to the

 

 

unbalanced distribution of the laundry in

 

 

the drum.

 

 

 

42 / EN

Washing Machine / User’s Manual

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Washing Machine Explanation of symbols Dear CustomerGeneral safety instructions Troubleshooting General safety instructions Childrens safety Electrical safety Compliance with Weee Directive Package informationYour washing machine OverviewPackage Contents Technical specifications 11 / ENRated capacity kg Installation Do not place the product on the power cable12 / EN Removing packaging reinforcement 13 / ENConnecting water supply Inlet, blue hose right max ºC is for cold water inlet14 / EN Connecting the drain hose to the drain An appropriate clamp as not to come off and leak 15 / EN16 / EN Fitting a different plug 17 / ENPreparation 18 / ENPreparing laundry for washing 19 / ENUsing detergent and softener 20 / EN21 / EN Using gel and tablet detergent 22 / ENSoiled Tips for efficient washingHeavily NormallyOperating the product Programme and consumption table 25 / EN26 / EN 0141Programme selection Programmes27 / EN BabyClothing AutoCottons Eco GentleCareUse when you want to rinse or starch separately Use to drain the water in the machine Temperature selection29 / EN This function holds the laundry in the final rinsing water Programme is displayed on the Spin Speed indicatorSpin speed selection 30 / ENAuxiliary function selection 31 / ENQuicker Wash Night ModePrewash Extra RinseEnd Time 33 / EN34 / EN To deactivate the childproof lock 35 / EN36 / EN Maintenance and cleaning 37 / ENClose the taps Draining remaining water and cleaning the pump filter Order to clean the dirty filter and discharge the waterPull the emergency draining hose out from its seat Absorb any spilled water Problem Reason Solution 41 / ENManual 42 / ENWashing takes longer With display43 / EN Laundry became stiff 44 / ENIt does not rinse well After washing45 / EN Page UK Mainland & Northern Ireland Republic of IrelandWashing Machines 0845 600 Guarantee
Top Page Image Contents