Beko WMG 10454 W user manual Installation, Do not place the product on the power cable, 12 / EN

Page 12

4.4Installation

•Apply to the nearest authorized service agent for the installation of your product.

•Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.

•Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

•Make sure that the installation and electrical connections of the product are performed by authorized service. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

•Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

4.4.1Appropriate installation location

•Place the product on a hard and level floor. Do not put it onto a carpet with high pile or other similar surfaces.

•When the washing machine and drier are placed on top of each other, their total weight –when loaded– amounts to 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!

•Do not place the product on the power cable.

•Do not install the product in the environments where the temperature falls below 0 ºC.

•Leave a minimum space of 1 cm between the machine and the furniture.

•On a graduated floor, do not place the product next to the edge or on a platform.

12 / EN

Washing Machine / User’s Manual

Image 12

Contents Washing Machine Explanation of symbols Dear CustomerGeneral safety instructions Troubleshooting General safety instructions Childrens safety Electrical safety Compliance with Weee Directive Package informationYour washing machine OverviewPackage Contents Technical specifications 11 / ENRated capacity kg Installation Do not place the product on the power cable12 / EN Removing packaging reinforcement 13 / ENConnecting water supply Inlet, blue hose right max ºC is for cold water inlet14 / EN Connecting the drain hose to the drain An appropriate clamp as not to come off and leak 15 / EN16 / EN Fitting a different plug 17 / ENPreparation 18 / ENPreparing laundry for washing 19 / ENUsing detergent and softener 20 / EN21 / EN Using gel and tablet detergent 22 / ENTips for efficient washing HeavilySoiled NormallyOperating the product Programme and consumption table 25 / EN26 / EN 0141Programme selection Programmes27 / EN Auto Cottons EcoBabyClothing GentleCareUse when you want to rinse or starch separately Use to drain the water in the machine Temperature selection29 / EN Programme is displayed on the Spin Speed indicator Spin speed selectionThis function holds the laundry in the final rinsing water 30 / ENAuxiliary function selection 31 / ENNight Mode PrewashQuicker Wash Extra RinseEnd Time 33 / EN34 / EN To deactivate the childproof lock 35 / EN36 / EN Maintenance and cleaning 37 / ENClose the taps Draining remaining water and cleaning the pump filter Order to clean the dirty filter and discharge the waterPull the emergency draining hose out from its seat Absorb any spilled water Problem Reason Solution 41 / EN42 / EN Washing takes longerManual With display43 / EN 44 / EN It does not rinse wellLaundry became stiff After washing45 / EN Page UK Mainland & Northern Ireland Republic of IrelandWashing Machines 0845 600 Guarantee