Beko WMG 10454 W user manual 45 / EN

Problem	Reason	Solution
Detergent residue in the	Detergent is put in wet drawer.	ŠŠDry the detergent drawer before putting
detergent drawer. (**)		in detergent.
	Detergent has gotten damp.	ŠŠKeep detergents closed in an environment
		free of humidity and do not expose them
		to excessive temperatures.
	Water pressure is low.	ŠŠCheck the water pressure.
	The detergent in the main wash compartment	ŠŠCheck the holes and clean if they are
	got wet while taking in the prewash water.	clogged.
	Holes of the detergent compartment are
	blocked.
	There is a problem with the detergent drawer	ŠŠCall the Authorized Service Agent.
	valves.
	Detergent might be mixed with the softener.	ŠŠDo not mix the softener with detergent.
		Wash and clean the dispenser with hot
		water.
	Regular drum cleaning is not applied.	ŠŠClean the drum regularly. For this, please
		see 4.7.2.
Too much foam forms in	Improper detergents for the washing machine	ŠŠUse detergents appropriate for the
the machine. (**)	are being used.	washing machine.
	Excessive amount of detergent is used.	ŠŠUse only sufficient amount of detergent.
	Detergent was stored under improper	ŠŠStore detergent in a closed and dry
	conditions.	location. Do not store in excessively hot
		places.
	Some meshed laundry such as tulle may foam	ŠŠUse smaller amounts of detergent for this
	too much because of their texture.	type of item.
	Detergent is put in the wrong compartment.	ŠŠPut the detergent in the correct
		compartment.
	Softener is being taken early.	ŠŠThere may be problem in the valves
		or in the detergent dispenser. Call the
		Authorized Service Agent.
Foam is overflowing from	Too much detergent is used.	ŠŠMix 1 tablespoonful softener and ½
the detergent drawer.		l water and pour into the main wash
		compartment of the detergent drawer.
		ŠŠPut detergent into the machine suitable
		for the programmes and maximum
		loads indicated in the “Programme and
		consumption table”. When you use
		additional chemicals (stain removers,
		bleachs and etc), reduce the amount of
		detergent.
Laundry remains	Excessive foam might have occurred and	ŠŠUse recommended amount of detergent.
wet at the end of the	automatic foam absorption system might have
programme. (*)	been activated due to too much detergent
	usage.

(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2

A CAUTION: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

45 / EN Washing Machine / User’s Manual