Electrolux 12710 VIT, 14710 VIT manual This function cannot be used with Prewash

Page 15

Description of the appliance

To empty out water:

select the DRAIN programme to empty out the water without spin- ning.

select the SPIN programme for draining and spinning.

select the SPIN SPEED and depress the START/PAUSE button;

Warning! The programme selector dial must be turned first to RESET and then to the DRAIN or SPIN programmes.

The RINSE HOLD option cannot be selected for the automatic WASHING & DRYING programme.

PREWASH

The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin in programmes for Cotton and Easy-cares, and with emp- tying of the water only for Delicates.

This option is not available with the wool programme and cannot be used with STAIN.

For use when washing heavily soiled laundry.

STAIN

To treat heavily soiled washing or stained washing with stain remover (extended main wash with time optimised stain action phase, not selectable for wool/handwash or programmes with temperatures lower than 40°C).

This function cannot be used with PREWASH.

QUICK

By pressing this button the washing time is reduced. For use when washing lightly soiled laundry.

This option is not available with the wool/handwash and Economy pro- gramme.

EASY IRON

Selecting this button the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform 6 rinses instead of 3 for cotton and 4 rinses instead of 3 for synthetics. This function can be used only for cotton and Easy-Cares (synthetic) fabrics.

If this option is selected for cotton programmes, the spin speed automaticaly will reduce to 900 rpm.

If this option is selected for synthetic programmes with a temperature of 60°C, the machine will perform a washing cycle at max 40°C.

15

Image 15
Contents Lavamat Turbo 12710 VIT Lavamat Turbo 14710 VIT Dear customer Contents Contents Technical data Service & Spare Parts Guarantee Conditions Safety instructions General safetyInstallation During use Child safetyDisposal Packaging materialsMachine Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceControl panel Programme selector dialSelector is divided into 5 sections START/PAUSE button Delay Start buttonON/OFF button Mains-on lightProgramme Option buttons Drying Time buttonThis function cannot be used with Prewash PrewashCancelling a programme DisplayProgramme progress display Altering an option/programme which is running Opening the door after the programme has startedAfter approximately 3 minutes, you can open the door Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Easy-cares Weight of laundryTypes of fabric and care labels CottonDelicates Which detergent? Detergents and additivesTraditional Powders Which form?As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying timeAdditional drying Add detergent and additive How to washSwitching the machine on Load the laundrySelection of the Delay Start option Selection of the desired optionSelection of the desired wash programme Starting the programme How to dry At the end of the programmeDrying only Remove the laundry Automatic washing and dryingNON-STOP programme Press the START/PAUSE button to start the programmeProgramme chart Wash programmesNot with the positions Max Consumption Special programmesDegree of drying Type of fabric Max. load Spin speed DryingExterior Cleaning and maintenancePeriodical cleaning After each washDrain filter collects threads and small objects inadver Refit the drawer after cleaningDoor seal Drain filterAt the end screw the filter again Frost precautionsWater inlet filter Emergency emptying outSomething not working? TroubleshootingProblem Noisy Feet have not been Reduce the load White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseTechnical data Water pressure 05 0.8 MPaThis appliance complies with the following EC directives Help us to help you Service & Spare PartsService & Spare Parts 08705 929Customer care Guarantee does not cover commercial use Guarantee ConditionsEuropean Guarantee Safety instructions for the installer Instructions for installation and electrical con- nectionDimensions of the appliance Unpacking InstallationPositioning LevellingSet the machine Into a drainage standpipe Water inlet cold water connection onlyWater drainage Do not connect to a hot water supplyPage Part of your home Interest of the environmentElectrical connections Remove the fuse from the cut off plugPermanent connection Preparation and assembly of the door Building-inDoor Hinges Mounting the doorCounter-magnet See Fig. H Drill four fixing holes see Fig. GPage From the Electrolux Group. The world’s No choice