Electrolux 12710 VIT, 14710 VIT manual Water inlet cold water connection only, Water drainage

Page 52

Installation

Water inlet (cold water connection only)

Connect the hose to a tap with a 3/4” thread.

Installation should comply with local

water authority and building regulations’ requirements.

Set the hose correctly by loosening the ring

nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks.

Do not connect to a hot water supply.

The inlet hose is provided with a water stop device, which protects against damage caused by water leaks in the hose which could develop due to nat- ural ageing of the hose. This fault is shown by a red sector in the window “A”. Should this occur, turn

the water tap off and refer to your Service Force A Centre to replace the hose.

Water drainage

TThis appliance is designed to be perma- nently plumbed into your home's drainage system using one of the following methods.

1. Into a drainage standpipe.

Firstly form a hook in the end of the drain hose using the “U” piece” supplied.

Place the drain hose into your standpipe, which should have an internal diameter of approx- imately 38mm thus ensuring there is an air break between the drain hose and standpipe.

P1074

“U” piece supplied

P1199

38 mm (11.2”)

standpipe diameter

30 cm (12")

52

Image 52

Contents Lavamat Turbo 12710 VIT Lavamat Turbo 14710 VIT Dear customer Contents Contents Technical data Service & Spare Parts Guarantee Conditions General safety Safety instructionsInstallation Child safety During usePackaging materials DisposalMachine Tips for environmental protection Main features of your washer-dryer Description of the appliance Front viewProgramme selector dial Control panelSelector is divided into 5 sections Delay Start button ON/OFF buttonMains-on light START/PAUSE buttonDrying Time button Programme Option buttonsPrewash This function cannot be used with PrewashDisplay Cancelling a programmeProgramme progress display Opening the door after the programme has started Altering an option/programme which is runningAfter approximately 3 minutes, you can open the door Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryWeight of laundry Types of fabric and care labelsCotton Synthetics Easy-caresDelicates Detergents and additives Which detergent?Which form? Traditional PowdersPreparing the drying cycle LoadGarments not suitable for drying As a dryer, the machine works on the condensation principleDrying symbols on garment labels Duration of the drying cycleModification of the drying time Fibre residueAdditional drying How to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the desired option Selection of the Delay Start optionSelection of the desired wash programme Starting the programme At the end of the programme How to dryDrying only Automatic washing and drying NON-STOP programmePress the START/PAUSE button to start the programme Remove the laundryWash programmes Programme chartNot with the positions Special programmes Max ConsumptionDrying Degree of drying Type of fabric Max. load Spin speedCleaning and maintenance Periodical cleaningAfter each wash ExteriorRefit the drawer after cleaning Door sealDrain filter Drain filter collects threads and small objects inadverFrost precautions Water inlet filterEmergency emptying out At the end screw the filter againTroubleshooting Something not working?Problem Noisy Feet have not been Reduce the load Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryWater pressure 05 0.8 MPa Technical dataThis appliance complies with the following EC directives Service & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee Conditions Guarantee does not cover commercial useEuropean Guarantee Instructions for installation and electrical con- nection Safety instructions for the installerDimensions of the appliance Installation UnpackingLevelling PositioningSet the machine Water inlet cold water connection only Water drainageDo not connect to a hot water supply Into a drainage standpipePage Interest of the environment Electrical connectionsRemove the fuse from the cut off plug Part of your homePermanent connection Building-in Preparation and assembly of the doorDoor Mounting the door HingesCounter-magnet Drill four fixing holes see Fig. G See Fig. HPage From the Electrolux Group. The world’s No choice