Electrolux 12710 VIT, 14710 VIT manual Altering an option/programme which is running

Page 17

Description of the appliance

Altering an option/programme which is running

To alter an option, first set the machine to PAUSE by pressing the START/PAUSE button.

Any option can be modified before the machine starts it. After select- ing the new option press the START/PAUSE button again to re-start the selected programme.

To modify the selected programme turn the programme selector dial to RESET and then choose a new programme.

After pressing the START/PAUSE button again, the machine restarts with the newly selected programme and the water is not emptied out.

Opening the door after the programme has started

You can open the door, after having set the machine to PAUSE, provided the following conditions exist:

•the machine is not in the heating or drying phase beyond 55°C;

•the level of the water is not high;

•the drum is not turning.

If these requirements are met, when you pause the machine the door can be opened.

Should it not be possible to open the door, and should it be absolutely nec- essary to do so, switch the machine off by pressing the ON/OFF button.

After approximately 3 minutes, you can open the door.

Pay attention to the level and temperature of the water in the machine!

When you close the door and press the ON/OFF and START/PAUSE buttons again, the washing machine will resume the programme from the point where it had been interrupted.

17

Image 17

Contents Lavamat Turbo 12710 VIT Lavamat Turbo 14710 VIT Dear customer Contents Contents Technical data Service & Spare Parts Guarantee Conditions Installation Safety instructionsGeneral safety During use Child safetyMachine DisposalPackaging materials Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceSelector is divided into 5 sections Control panelProgramme selector dial ON/OFF button Delay Start buttonMains-on light START/PAUSE buttonProgramme Option buttons Drying Time buttonThis function cannot be used with Prewash PrewashProgramme progress display Cancelling a programmeDisplay After approximately 3 minutes, you can open the door Altering an option/programme which is runningOpening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Weight of laundryCotton Synthetics Easy-caresDelicates Which detergent? Detergents and additivesTraditional Powders Which form?Load Preparing the drying cycleGarments not suitable for drying As a dryer, the machine works on the condensation principleDuration of the drying cycle Drying symbols on garment labelsModification of the drying time Fibre residueAdditional drying Switching the machine on How to washLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the Delay Start optionSelection of the desired option Starting the programme Drying only How to dryAt the end of the programme NON-STOP programme Automatic washing and dryingPress the START/PAUSE button to start the programme Remove the laundryNot with the positions Programme chartWash programmes Max Consumption Special programmesDegree of drying Type of fabric Max. load Spin speed DryingPeriodical cleaning Cleaning and maintenanceAfter each wash ExteriorDoor seal Refit the drawer after cleaningDrain filter Drain filter collects threads and small objects inadverWater inlet filter Frost precautionsEmergency emptying out At the end screw the filter againSomething not working? TroubleshootingProblem Noisy Feet have not been Reduce the load If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataWater pressure 05 0.8 MPa Service & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee does not cover commercial use Guarantee ConditionsEuropean Guarantee Safety instructions for the installer Instructions for installation and electrical con- nectionDimensions of the appliance Unpacking InstallationSet the machine PositioningLevelling Water drainage Water inlet cold water connection onlyDo not connect to a hot water supply Into a drainage standpipePage Electrical connections Interest of the environmentRemove the fuse from the cut off plug Part of your homePermanent connection Door Preparation and assembly of the doorBuilding-in Counter-magnet HingesMounting the door See Fig. H Drill four fixing holes see Fig. GPage From the Electrolux Group. The world’s No choice