How to wash
At the end of the programme
The machine stops automatically. A blinking zero appears on the display. The END light comes on in the programme progress display, the START/PAUSE light is off.
Turn the selector dial to RESET.
If the RINSE HOLD option has been selected the END and the RINSE HOLD lights remain lit, the door is blocked, to indicate that the water must be emptied out before opening the door either
To empty out water:
•select the DRAIN programme to empty out the water without spin- ning.
•select the SPIN programme for spinning.
•select the SPIN SPEED and depress the START/PAUSE button;
Warning! The programme selector dial must be turned first to RESET and then to the DRAIN or SPIN programmes.
At the end of the programme the selector dial must be turned to position RESET and the machine must be switched off by pressing the ON/OFF button.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas- ant smells.
How to dry
Drying only
Warning! Do not exceed the maximum laundry loads:
-2.5 kg for linen and cottons
-1.5 kg for
The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe.
Depress the ON/OFF button to switch the machine on.
Select the drying programme (for cotton or
Depress the DRYING TIME button until the time you want appears in the dis- play.
30