Electrolux 12710 VIT, 14710 VIT manual Instructions for installation and electrical con- nection

Page 48

Instructions for installation and electrical con- nection

Safety instructions for the installer

This appliance is heavy, care should be taken when moving it.

When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer.

All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protec- tive transit devices are not removed or are not completely removed. Refer to the relevant paragraph.

Any electrical work required to install this appliance must be carried out by a qualified electrician or competent person.

Any plumbing work required to install this appliance must be carried out by a qualified plumber or competent person.

After having installed the machine, check that it is not standing on its elec- trical supply cable.

If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the adjustable feet and the floor.

The installation should comply with local water authority and building reg- ulations requirements.

Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.

48

Image 48
Contents Lavamat Turbo 12710 VIT Lavamat Turbo 14710 VIT Dear customer Contents Contents Technical data Service & Spare Parts Guarantee Conditions Safety instructions General safetyInstallation Child safety During useDisposal Packaging materialsMachine Tips for environmental protection Main features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialSelector is divided into 5 sections Delay Start button ON/OFF buttonMains-on light START/PAUSE buttonDrying Time button Programme Option buttonsPrewash This function cannot be used with PrewashCancelling a programme DisplayProgramme progress display Altering an option/programme which is running Opening the door after the programme has startedAfter approximately 3 minutes, you can open the door Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryWeight of laundry Types of fabric and care labelsCotton Synthetics Easy-caresDelicates Detergents and additives Which detergent?Which form? Traditional PowdersPreparing the drying cycle LoadGarments not suitable for drying As a dryer, the machine works on the condensation principleDrying symbols on garment labels Duration of the drying cycleModification of the drying time Fibre residueAdditional drying How to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the Delay Start option Selection of the desired optionSelection of the desired wash programme Starting the programme How to dry At the end of the programmeDrying only Automatic washing and drying NON-STOP programmePress the START/PAUSE button to start the programme Remove the laundryProgramme chart Wash programmesNot with the positions Special programmes Max ConsumptionDrying Degree of drying Type of fabric Max. load Spin speedCleaning and maintenance Periodical cleaningAfter each wash ExteriorRefit the drawer after cleaning Door sealDrain filter Drain filter collects threads and small objects inadverFrost precautions Water inlet filterEmergency emptying out At the end screw the filter againTroubleshooting Something not working?Problem Noisy Feet have not been Reduce the load Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data Water pressure 05 0.8 MPaThis appliance complies with the following EC directives Service & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee Conditions Guarantee does not cover commercial useEuropean Guarantee Instructions for installation and electrical con- nection Safety instructions for the installerDimensions of the appliance Installation UnpackingPositioning LevellingSet the machine Water inlet cold water connection only Water drainageDo not connect to a hot water supply Into a drainage standpipePage Interest of the environment Electrical connectionsRemove the fuse from the cut off plug Part of your homePermanent connection Preparation and assembly of the door Building-inDoor Hinges Mounting the doorCounter-magnet Drill four fixing holes see Fig. G See Fig. HPage From the Electrolux Group. The world’s No choice