Electrolux EWW 168543 W USE Washing & Drying, NON-STOP Programme Washing and Automatic Drying

Page 12

12electrolux

7.At the end of the programme, the buz- zer sounds. Three blinking «0.00» zeros appear on the display. The door locked icon 2.8 is on.

During the last 10 minutes of the drying cycle the appliance performs an anti- crease phase. Through this time the door is locked. The display shows three flashing zeros «0.00».

At the end of the anti-crease phase the door locked icon 2.8 disappears.

If you wish to open the door before or during the anti-crease phase or to in- terrupt it, press any button or turn the programme selector dial to any pro- gramme position (except O).

8.Turn the selector dial to the O position to switch the machine off.

9.Remove the laundry from the drum.

Note!

The different type of cottons (towelling, sheets, shirts, and so on) or any laundry items rolling up during the spinning phase may result in partial dryness. In the excep- tional case that at the end of the cycle the laundry remains slightly wet, we suggest that you unfold the rolled up items, redis- tribute them evenly in the drum and select an additional drying cycle of 20-30 minutes.

If you set only 10 minutes of drying phase with the drying time button (6), the appliance performs only a cooling phase.

USE - WASHING & DRYING

NON-STOP PROGRAMME - WASHING AND AUTOMATIC DRYING

The maximum load size is 4 kg for cotton and 3 kg for synthetic.

Caution! Do not use a dosing device/ball when carrying out a washing and drying programme.

1.Load the laundry.

2.Add detergent and fabric softener.

3.Switch the machine on by turning the selector dial to the set washing pro- gramme/fabric.

4.Select the required options by pressing the relevant buttons.

If possible, do not select a spin speed lower than that proposed by the appliance to avoid too long a drying time therefore saving ener- gy.

In any case the reduction of the spin speed is only possible after selecting drying.

For cottons and synthetic the lowest value you can select is 900 r.p.m.

5.Set the dryness degree by pressing button 5. The display shows the whole duration of the washing and the set drying cycle.

6.Start the programme by pressing but- ton 8. The time remaining is updated every minute on the display.

7.At the end of the programme turn the selector dial to the O position to switch the machine off. Remove the laundry.

NON-STOP PROGRAMME - WASHING AND TIMED DRYING

The recommended load size is 4 kg for cot- ton, 3 kg for synthetic and 1.5 for wool.

By pressing Drying Time button it is al- so possible to dry up to 6 kg of cotton items (see the «Drying Programme » ta- ble).

Caution! Do not use a dosing device/ball when carrying out a washing and drying programme.

1.Load the laundry and add detergent and fabric softener.

2.Switch the machine on by turning the selector dial to the set washing pro- gramme/fabric.

Image 12
Contents EN Washer Dryer Contents Safety InformationInstallation Child SafetyUSE Product Description Control Panel Detergent Dispenser DrawerTemperature Delay StartProgramme Selector Dial Spin ReductionChild safety lock see «Personali Delay iconAlarm codes Delay Time valueAcoustic Signals Child Safety LockFirst USE PersonalisationSelect the Temperature by Pressing Button Select the Delay Start by Pressing ButtonCancelling the delayed start after hav- ing pressed button Reduce the Spin Speed by Pressing ButtonCancelling a Programme Start the Programme by Pressing ButtonSelect the Time Manager Option by Pressing Buttons Altering AN Option or a Running ProgrammeUSE Drying AT the END of the ProgrammeDrying only USE Washing & Drying NON-STOP Programme Washing and Automatic DryingNON-STOP Programme Washing and Timed Drying Temperatures Helpful Hints and TipsFluff in the Fabrics Sorting OUT the LaundryLaundry Weights Maximum LoadsRemoving Stains Detergents and AdditivesDrying Hints Degrees of Water HardnessPreparing the Drying Cycle Laundry not Suitable for DryingWashing Programmes Drying Cycle DurationAdditional Drying OptionsSeda 30 Cold RinseDrain SpinDrying Programmes Automatic ProgrammesTimed Programmes Care and Cleaning Cleaning the Dispenser Drawer DescalingMaintenance Wash External CleaningWashing Drum Door SealDrain Pump Cleaning the Water Inlet Filters Frost Precautions What to do IF…Emergency Emptying OUT Problem Possible cause/SolutionToo little detergent or unsuitable detergent has been used Technical Data Consumption ValuesProgramme Water consumptionInstallation UnpackingPositioning Water InletRubber Feet KIT Electrical Connection Water DrainageMust be carried out by a Service Centre Environment ConcernsPackaging Materials Ecological HintsElectrolux Electrolux 132936871-A-502011