Electrolux EWW 168543 W user manual Washing Drum, Door Seal, Drain Pump

Page 20

20electrolux

Clean the chamber of dispenser drawer with a brush.

WASHING DRUM

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool.

1.Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2.Run a washing cycle without any wash- ing to clean off any cleaning agent resi- dues.

Programme: Short Cotton Programme at maximum temperature and add ap- prox. 1/4 measuring cup of detergent.

DOOR SEAL

Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold.

DRAIN PUMP

Regularly examine the drain pump and make sure that it is clean.

Clean the pump regularly and/or if:

The appliance does not drain the water.

The drum cannot turn.

The appliance makes an unusual noise because of the blockage of the drain pump.

A problem with water draining is detected (see chapter “What to do if...” for more details).

Warning!

1.Disconnect the mains plug from the mains socket.

2.Do not remove the filter while the appliance operates. Do not clean the drain pump if the water in the appliance is hot. The water must be cold before you clean the drain pump.

To clean the drain pump: 1. Open the pump door.

2.Put a container below the recess of the drain pump to collect the water that flows out.

3.Press the two levers and pull forward the drainage duct to let the water flow out.

Image 20
Contents EN Washer Dryer Contents Safety InformationUSE InstallationChild Safety Product Description Control Panel Detergent Dispenser DrawerTemperature Delay StartProgramme Selector Dial Spin ReductionChild safety lock see «Personali Delay iconAlarm codes Delay Time valueAcoustic Signals Child Safety LockFirst USE PersonalisationSelect the Temperature by Pressing Button Select the Delay Start by Pressing ButtonCancelling the delayed start after hav- ing pressed button Reduce the Spin Speed by Pressing ButtonCancelling a Programme Start the Programme by Pressing ButtonSelect the Time Manager Option by Pressing Buttons Altering AN Option or a Running ProgrammeDrying only USE DryingAT the END of the Programme NON-STOP Programme Washing and Timed Drying USE Washing & DryingNON-STOP Programme Washing and Automatic Drying Temperatures Helpful Hints and TipsFluff in the Fabrics Sorting OUT the LaundryLaundry Weights Maximum LoadsRemoving Stains Detergents and AdditivesDrying Hints Degrees of Water HardnessPreparing the Drying Cycle Laundry not Suitable for DryingWashing Programmes Drying Cycle DurationAdditional Drying OptionsSeda 30 Cold RinseDrain SpinTimed Programmes Drying ProgrammesAutomatic Programmes Care and Cleaning Cleaning the Dispenser Drawer DescalingMaintenance Wash External CleaningDrain Pump Washing DrumDoor Seal Cleaning the Water Inlet Filters Emergency Emptying OUT Frost PrecautionsWhat to do IF… Problem Possible cause/SolutionToo little detergent or unsuitable detergent has been used Technical Data Consumption ValuesProgramme Water consumptionInstallation UnpackingRubber Feet KIT PositioningWater Inlet Electrical Connection Water DrainageMust be carried out by a Service Centre Environment ConcernsPackaging Materials Ecological HintsElectrolux Electrolux 132936871-A-502011