26electrolux
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water tempera- ture and on the ambient temperature.
INSTALLATION
UNPACKING | 3. Unscrew the three bolts. |
|
All transit bolts and packing must be re- |
|
|
moved before using the appliance. |
|
|
You are advised to keep all transit devices |
|
|
so that they can be refitted if the machine |
|
|
ever has to be transported again. |
|
|
1. After removing all the packaging, care- | 2 |
|
fully lay machine on it’s back to remove | 1 | |
the polystyrene base from the bottom. |
| |
|
|
2.Remove the power supply cable and the draining and inlet hose from the hose holders on the rear of the appli- ance.
4. Slide out the relevant plastic spacers.
5.Open the porthole and remove the pol- ystyrene block fitted on the door seal.