If required, pour fabric softener into the compartment marked 
(the amount used must not exceed the «MAX» mark in the drawer). Close the drawer gently.
SELECT THE REQUIRED PROGRAMME BY TURNING THE PROGRAMME SELECTOR DIAL (1)
Turn the programme selector dial to the re- quired programme. The washing machine will propose a temperature and automati- cally select the maximum spin value provi- ded for the programme you have chosen. You can change these values by operating the corresponding buttons. The green pilot light of the button 8 starts to flash.
The selector dial can be turned either clock- wise or counterclockwise. Turn to position 
to reset programme/Switching the ma-
chine off.
At the end of the programme the selec- tor dial must be turned to position 
, to switch the machine off.
Caution! If you turn the programme selector dial to another programme when the machine is working, the red pilot light of button 8 will blink 3 times and the message Err is displayed to indicate a wrong selection. The machine will not perform the new selected programme.
SELECT THE TEMPERATURE BY PRESSING BUTTON 3
By selecting a programme, the appliance proposes automatically a default tempera- ture.
Press this button repeatedly to increase or decrease the temperature, if you want your
electrolux 9
laundry to be washed at a different temper- ature.
REDUCE THE SPIN SPEED BY PRESSING BUTTON 4
By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme. Press button 4 repeatedly to change the spin speed, if you want your laundry to be spun at a different speed.
SELECT AN ADDITIONAL RINSE
This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be nec- essary to rinse the laundry using an extra quantity of water (Extra Rinse).
To activate this option press simultaneous- ly the buttons 5 and 7 for some seconds. The relevant icon will appear on the display. This function stays permanently on.
To remove it press the same buttons again until the Extra Rinse icon disappears.
SELECT THE DELAY START BY PRESSING BUTTON 7
Press the button 7 repeatedly to select the desired delay. The corresponding icon 2.10 will appear on the display.
The set delay time value (up to 20 hours) will appear for a few seconds, then the du- ration of the programme will appear again. You must select this option after you have set the programme and before you press button 8.
You can cancel or modify the delay time at any moment, before you press button 8. Selecting the delayed star:
1.select the programme and the required options.
2.set the delay start by pressing the but- ton 7.
3.press button 8. The machine starts its hourly countdown. The programme will start after the selected delay has ex- pired.
Cancelling the delayed start after hav- ing pressed button 8:
1.set the washing machine to PAUSE by pressing button 8.
2.press button 7 once until the symbol 
’ is displayed