JVC KD-LH1101 manual RDS Operations, What you can do with RDS, To use Network-Tracking Reception

Page 15

RDS OPERATIONS

What you can do with RDS

RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc.

Another advantage of RDS function is called “Enhanced Other Networks.” By using the Enhanced Other Networks data sent from a station, you can tune in to a different station of a different network broadcasting your favorite programme or traffic announcement while listening to another programme or to another source such as CD.

By receiving the RDS data, this unit can do the following:

Tracing the same programme automatically (Network-Tracking Reception)

Standby Reception of TA (Traffic Announcement) or your favorite programme

PTY (Programme Type) search

Programme search

And some other functions

Tracing the same programme automatically (Network-Tracking Reception)

When driving in an area where FM reception is not good, the tuner built in this unit automatically tunes in to another RDS station, broadcasting the same programme with stronger signals. So, you can continue to listen to the same programme in its finest reception, no matter where you drive. (See the illustration on page 21.)

Two types of the RDS data are used to make Network-Tracking Reception work correctly —PI (Programme Identification) and AF (Alternative Frequency).

Without receiving these data correctly from the RDS station you are listening to, Network- Tracking Reception will not operate.

To use Network-Tracking Reception

You can select the different modes of network- tracking reception to continue listening to the same programme in its finest reception.

When shipped from the factory, “AF” is selected.

• AF:

Network-Tracking Reception is

 

activated without Regionalization.

 

With this setting, the unit switches to

 

another station within the same

 

network when the receiving signals

 

from the current station become

 

weak. (In this mode, the programme

 

may differ from the one currently

 

received.)

 

The AF indicator lights up.

AF Reg: Network-Tracking Reception is activated with Regionalization.

With this setting, the unit switches to another station, within the same network, broadcasting the same programme when the receiving signals from the current station become weak.

The REG indicator lights up.

• Off:

 

 

 

Network-Tracking Reception is

 

 

 

 

 

deactivated.

 

 

 

 

 

Neither the AF nor the REG indicator

 

 

 

 

 

lights up.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AF or REG indicator lights up.

Note:

If a DAB tuner is connected and Alternative Reception (for DAB services) is activated, Network-Tracking Reception is also activated (“AF”) automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Reception. (See page 51.)

ENGLISH

CONTINUED ON THE NEXT PAGE

15

Image 15
Contents KD-LH1101 Name/Rating plate How to reset your unitPosition And Reproduction Of Labels Bottom panel of the main unitContents Location of the Buttons Control panelIllumination Navigation for easy operations Remote controller Place the battery Preparing the remote controllerInstalling the battery Remove the battery holderBasic Operations Turning on the powerTo drop the volume in a moment To turn off the powerSelect Off All Demo Int Demo Finish the setting To cancel the display demonstration, followTo activate the display demonstration, repeat Setting the clock Adjust the hour Set the minuteSet the clock system Searching a station manually Manual search Radio OperationsListening to the radio Searching a station automatically Auto searchSelect the FM band FM1 3 you want to store FM stations into FM station automatic preset SSMWhen an FM stereo broadcast is hard to receive Storing stations in memory92.5 MHz Manual presetStart automatic preset Tune in to a station in this example Press M ModeSelecting a preset station directly Selecting a preset station using the preset station listEach time you press Button, the band changes as follows Following pages When receiving an AM or non FM RDSChanging the display pattern StationRDS Operations What you can do with RDSTo use Network-Tracking Reception PTY Stnby standby setting screen appears on the display Using TA Standby ReceptionSelect one of the twenty-nine PTY codes. See Using PTY Standby ReceptionTo select your favorite PTY code for PTY Standby Reception To set PTY Standby ReceptionTo search your favorite programme type, see Searching your favorite programmeTo store your favorite programme types To store your favorite programme types, seeEnglish Selected preset number flashes for a whileControl dial counterclockwise Setting the TA volume levelAutomatic clock adjustment To activate programme search, followSame programme can be received on different frequencies PTY codesInsert a CD into the loading slot CD OperationsPlaying a CD Open the control panelTo go to a particular track directly To stop play and eject the CDTo fast-forward or reverse the track To go to the next or previous tracksTo play back tracks repeatedly Track Repeat Play How to go to the desired track quicklyTo play back tracks at random Disc Random Play Track 36 \ 30 \ 20 \While pressing CD/CD-CH, press Hold for more than 2 seconds To cancel the prohibition and unlock the CDProhibiting CD ejection To play back only intros Track Intro ScanChanging the display pattern Adjusting the sound Sound AdjustmentsPress SEL select once Press the number button to select the sound mode you wantStoring your own sound AdjustmentsSelect the level meter pattern you want Activating the level meterMeter Press SEL select repeatedlyBasic Procedure Preferred Setting Mode PSM itemsOther Main Functions Contrast TA VolumeScroll DimmerTo select the font on the display Font Type To adjust the display contrast level ContrastTo select the source animation on the display-KeyIn CFM LCD TypeTo turn the trim illumination on or off TrimIllum To change the FM tuner selectivity If FilterTo select the external component to use Ext Input To select the telephone muting TelephoneHead lights, the display Off Cancels Auto DimmerTime Set Used to set the timer for Dimmer function Auto Activates Auto DimmerSelect the display color Setting the desired color for each sourceChanging the display color LineCreating your own color-User Select the user color adjustment screenOne of the user color adjustment screens appears You can adjust within the range of 00 toSources Maximum number Characters To erase the entered charactersCapital Small Accented letters Lower case Letters Upper caseConnectors Detaching the control panelAttaching the control panel CD Changer Operations Playing discsSelect the CD changer CD-CH CD CD-CH Selected disc number Current track and elapsed playing time To go to a particular disc directlyTo fast-forward or reverse the track/file To go to the next or previous tracks/filesTrack/File 36 \ 30 \ 20 \ 10 \ 9 \ How to go to the desired track/file quicklyTo go to a track/file quickly To skip to the next or previous folder only for MP3 discsDisplay can show only six disc names at a time To select a disc using the disc listsEx. When file list is selected Disc list Folder list File track listTo play back tracks/files at random Random PlayTo play back tracks/files repeatedly Repeat Play To play back only intros Intro Scan Intro TrackIntro Off Changing the display information Select the external component correctly Follow the procedure belowExternal Component Operations Select the external component Line CD LineSelect the DAB band DAB1, DAB2, or DAB3 What is DAB system?DAB Tuner Operations Select the DAB tunerStart searching for an ensemble Storing DAB services in memoryTo restore the FM/AM tuner To tune in to a particular ensemble without searchingTuning in to a preset DAB service Selecting a preset service using the preset service listSelect the DAB band DAB1, DAB2 or DAB3 you want While receiving an FM RDS station While receiving a DAB serviceTo use Alternative Reception You can keep listening to the same programChanging the display information Available characters Sound modes preset frequency level settingsSound Preset equalizing values Mode Additional InformationTroubleshooting Symptoms Causes RemediesLOW TEMP. indicator Changer Handling discs MaintenanceLW Tuner SpecificationsFM Tuner MW TunerHaving Trouble with operation? Voordat u aan de montage van het apparaat Before mounting PressVor dem Einbau Drücken Sie Avant le montage Appuyer surSicherstellen, daß das Gerät am Fahrwerk geerdet wird Used, they could damage the unitBe sure to ground this unit to the car’s chassis HinweisSi le câblage des enceintes de votre voiture NE Connectez PAS les fils d’enceintes duSonst das Gerät schwer beschädigt wird Zal het apparaat ernstige schade oplopenKD-LH3101 KD-LH1101KD-LH3101 KD-LH1101