Wash programmes

Progress indicators

Programme selection buttons

‘ON/OFF Pause’ button ‘START/CANCEL’ button

On-Off / Selecting a wash programme

Switch the machine ‘On’ by pressing the ‘ON/OFF Pause’ button.

To begin the selected programme press ‘START/CANCEL’. In order to switch the machine off at the end of the wash programme press the ‘ON/OFF Pause’ button.

To change a programme

Press the ‘START/CANCEL’ button once. The machine will bleep and enter a 2 minute pump out programme. ‘0:02’ will be displayed in the window. Pressing the

‘START/CANCEL’ button again will cancel the programme totally and ‘On’ will appear in the display window. A different programme can now be selected by pressing the required programme button. You might need to add detergent and fabric conditioner. Press the ‘START/CANCEL’ button to begin the new programme.

The progress status lights

This set of lights indicate what stage in the wash cycle the selected programme has reached.

Each light will appear in sequence as each stage of the programme is reached.

Door Locked Indicator...‘Keyhole’ symbol

The ‘Keyhole’ symbol will illuminate 2 seconds after you have pressed the ‘START/CANCEL’ button and will remain lit throughout the wash programme.

The ‘Keyhole’ symbol will be flashing at the end of the programme to indicate that the door is still locked. When the symbol goes off you will hear a bleep and the door can then be opened.

Door not closed

If a flashing ‘Door’ message appears in the display window, the door has not been closed properly and the programme will not start. Ensure that the door is closed properly by pushing it until you hear the catch click.

WARNINGS:

●Do not try to open the door during the wash programme.

●Do not allow children to play with the machine or tamper with the controls.

●If you cancel a programme part way through a wash or there is a power cut, take care when opening the door. The machine may contain hot water.

●This machine has a Child Lock feature, which when activated disables all controls (see ‘Options’).

PROGRAMMES AND OPTIONS