Hotpoint WD860, WD865 manual Key contacts

Page 31

Key contacts

After Sales Service

Over 1200 trained specialists, directly employed by us, ensure that you can have complete

confidence in both the appliances and services we offer.

Repair Service and Information Help Desk

UK: 08709 066 066

(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)

www.theservicecentre.co.uk

Republic of Ireland: 1850 302 200

Note: Our operators will require the following information:

Model number

Serial number

Extended Warranties

UK: 08709 088 088

(Open 8 to 8 Mon - Sun)

www.theservicecentre.co.uk

Republic of Ireland: 1850 502 200

Genuine Parts and Accessories

UK: 08709 077 077

(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)

www.theservicecentre.co.uk

Republic of Ireland: (01) 842 6836

Merloni Elettrodomestici UK Ltd, Morley Way, Peterborough, PE2 9JB.

PRINTED BY SIMLEX, FOUR ASHES, WOLVERHAMPTON

10/2004 - 195043157.01

Image 31

Contents Instructions Congratulations on choosing Ultima Typical wash and dry programme Safety first Remove the polystyrene base Installing your machineChoose a location Repeat steps 1 to 4 to remove the second transit bolt Remove the transit fixingsConnect your machine to the electricity supply Hot and cold fill Connect your machine to the water supplyIf the fill hoses are too short Connect the machine to a drainage system Move the machine into position Adjust the feetOnce the machine is in place Before washing laundry we recommend that you do Following Washcare tips= 6kg = 3kg‘ON/OFF Pause’ Do not try to open the door when a programme is runningTypical wash & dry programme Shooting sectionChoose a suitable detergent Dispenser drawerIf you wish to use liquid detergent Pre-wash Using in-drum dosingDispensing liquid detergent Dispensing tabletsWash programmes Programme times ‘Time to End’ Fabric type Acrylics and Synthetics Display Wash Maximum An intensive wash programme Items not suitable for tumble drying Dry programmesDrycare tips = 5kgMisuse of the dryer may create a fire hazard Independent drying programmeChoosing an option button OptionsSpin only programmes Time Saver Unbalanced load warning Automatic FeaturesPre Wash Auto half loadDrying Heat button Sensor Dry button Timed Dry button Maintenance wash Cleaning and maintenanceCleaning the outside Trouble Shooting Cannot read the information Display window TroubleshootingGuarantee terms and conditions Hotpoint guaranteeAvailable on our web-site at After sales servicePage Page Key contacts