Hotpoint WD865, WD860 manual Congratulations on choosing Ultima

Page 2

Congratulations on choosing

Ultima!!

Dispenser drawer Control panel

Please record the Model number and the Serial number of your machine on the Back Cover of the book for future reference.

The Model number can be found on the control panel. The Serial number can be found on the inner door trim.

Interlocking

door and

release lever

 

Cold water inlet

 

point and

 

attached fill hose

 

(blue connector)

 

Hot water inlet

Mains

point and

attached fill hose

cable

(red connector)

Front adjustable feet

Hooked end support

Rating plate

Transit bolts (both must

be removed before use)

Plumbing

Indicator Line

label Drainage

hose

Rear feet

2

Image 2
Contents Instructions Congratulations on choosing Ultima Typical wash and dry programme Safety first Choose a location Installing your machineRemove the polystyrene base Remove the transit fixings Repeat steps 1 to 4 to remove the second transit boltConnect your machine to the electricity supply If the fill hoses are too short Connect your machine to the water supplyHot and cold fill Connect the machine to a drainage system Once the machine is in place Adjust the feetMove the machine into position = 3kg Washcare tips= 6kg Before washing laundry we recommend that you do FollowingShooting section Do not try to open the door when a programme is runningTypical wash & dry programme ‘ON/OFF Pause’If you wish to use liquid detergent Dispenser drawerChoose a suitable detergent Dispensing tablets Using in-drum dosingDispensing liquid detergent Pre-washWash programmes Programme times ‘Time to End’ Fabric type Acrylics and Synthetics Display Wash Maximum An intensive wash programme = 5kg Dry programmesDrycare tips Items not suitable for tumble dryingIndependent drying programme Misuse of the dryer may create a fire hazardSpin only programmes Time Saver OptionsChoosing an option button Auto half load Automatic FeaturesPre Wash Unbalanced load warningDrying Heat button Sensor Dry button Timed Dry button Cleaning the outside Cleaning and maintenanceMaintenance wash Trouble Shooting Troubleshooting Cannot read the information Display windowHotpoint guarantee Guarantee terms and conditionsAfter sales service Available on our web-site atPage Page Key contacts