AEG 12710 manual Drying Time button, Programme Option buttons

Page 13

Description of the appliance

DRYING TIME button

If you wish to carry out a timed programme push the button until the drying time you want appears in the display according to the fabrics (cotton or synthetics) you have to dry.

For COTTON you can select a drying time from 10 minutes to 130 minutes. For SYNTHETICS you can select a time from 10 minutes to 100 minutes.

Programme Option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the START/PAUSE button.

When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.

STAIN

To treat heavily soiled or stained laundry with stain remover (extended main wash with time optimised stain action phase, not selectable for wool or pro- grammes with temperatures lower than 40°C).

This function cannot be used with (QUICK), (SOAK) and (PRE- WASH).

QUICK

By pressing this button the washing time is reduced. For use when washing lightly soiled laundry.

This option is not available with cotton 50°C, wool and economy pro- gramme and cannot be used with (STAIN).

SOAK

The machine performs a soak of about 30 minutes at 30°C. By pressing the (DELAY START) button the soak time can be prolonged up to 10 hours max. After this time the wash cycle will automatically start.

This function cannot be used with WOOL programme and (PRE- WASH) or (STAIN) options.

The soak programme ends with a short spin in programmes for Cotton and Synthetics, and with emptying of the water without spinning for Delicates.

13

Image 13
Contents Lavamat Turbo Electronic Dear customer Contents Page Contents Technical data Service General safety Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connectionProper use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delay Start buttonProgramme Option buttons Drying Time buttonPrewash Programme progress display DisplayAltering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Sort of laundry Approximate Dry weightsCotton Cotton 60Delicates 40 Detergents and additives Load Preparing the drying cycleGarments not suitable for drying Sort of laundryDuration of the drying cycle Drying symbols on garment labelsModification of the drying time Fibre residueAdditional drying How to dryDrying only Max. load Load the laundry How to washAdd detergent and additive Selection of the spin speed or Rinse Hold option Selection of the desired optionsSelection of the Extra Rinse option Selection of the Delay Start optionAt the end of the programme Starting the programmeNON-STOP programme Automatic washing and dryingWash programmes Programme chartDescrip Special programmesConsumption TionDegree of drying DryingMax. load Spin speed Drying time Mins 1200Max Water Energy Duration Load Litres KWh Minutes Consumption data for dryingPeriodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerDrain pump Door sealWater inlet filter Frost precautionsEmergency emptying out Problem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemNoisy Feet have not been E10 Problem Possible causeIf grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionFront view and side view Dimensions of the applianceRear view Unpacking InstallationLevelling PositioningWater inlet Water drainage