AEG 12710 manual Something not working?, Troubleshooting, Problem Possible cause Solution

Page 37

Something not working?

If during the spin cycle the machine makes an unusual whistling noise, different from the noise made by tradi- tional washing machines, this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the instructions below.

If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the call-out will be charged even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

-E10: problem with the water supply (phase light EXTRA RINSE is on)

-E20: problem with water draining (phase light RINSES is on)

-E40: door open (phase light is on)

Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, con- tact your local AEG Service Force Centre.

Problem		Possible cause	Solution


		The main electrical fuse	Replace the fuse.
		has blown.
		The door is not properly	Close the door; the click
		closed (E40).	of the lock should be heard.
The machine does not work		The plug is not connected.	Insert the plug.
		The START button has not	Press the button.
		been pressed.
		The DELAY START	Check the selected delay on
		option has been selected.	the display.

37

Image 37

Contents Lavamat Turbo Electronic Dear customer Contents Page Contents Technical data Service General safety Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connectionProper use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delay Start buttonProgramme Option buttons Drying Time buttonPrewash Programme progress display DisplayAltering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Sort of laundry Approximate Dry weightsCotton Cotton 60Delicates 40 Detergents and additives Load Preparing the drying cycleGarments not suitable for drying Sort of laundryDuration of the drying cycle Drying symbols on garment labelsModification of the drying time Fibre residueAdditional drying How to dryDrying only Max. load Load the laundry How to washAdd detergent and additive Selection of the spin speed or Rinse Hold option Selection of the desired optionsSelection of the Extra Rinse option Selection of the Delay Start optionAt the end of the programme Starting the programmeNON-STOP programme Automatic washing and dryingWash programmes Programme chartDescrip Special programmesConsumption TionDegree of drying DryingMax. load Spin speed Drying time Mins 1200Max Water Energy Duration Load Litres KWh Minutes Consumption data for drying Periodical cleaning Exterior Cleaning and maintenance After each wash Detergent dispenser drawerDrain pump Door sealWater inlet filter Frost precautionsEmergency emptying out Problem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemNoisy Feet have not been E10 Problem Possible causeIf grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionFront view and side view Dimensions of the applianceRear view Unpacking InstallationLevelling PositioningWater inlet Water drainage