AEG 12710 manual Safety instructions, General safety, Positioning, connection, starting up

Page 6

Safety instructions

The safety of AEG appliances complies with the industry standards and with legal requirements on the safety of appliances. However, as man- ufacturers, we feel it is our duty to provide the following safety notes.

General safety

•Repairs to the machine must be carried out only by qualified person- nel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local AEG Service Force Centre.

•Never start the machine if the electrical supply cable is damaged or the control panel or worktop are so damaged that inner components can be reached.

•Unplug the appliance before carrying out any cleaning or mainte- nance operations.

•Never pull the power supply cable to remove the plug from the sock- et; always take hold of the plug itself.

•Never spray the machine with a jet of water. Danger of electric shock!

•During high temperature wash programmes and during the drying cycle the door glass may get hot. Do not touch it!

•Let the water cool down before carrying out emergency emptying or before opening the door in an emergency.

•Small animals can gnaw electric wires and water hoses causing elec- trocution hazard and damage due to water leaks.

Positioning, connection, starting up

•Follow the instructions for positioning and connection.

•Carry out a first wash without laundry (COTTONS 60, with half the amount of detergent) in order to remove any manufacturing residue from the tub and the drum.

•Should the machine be purchased in winter, when temperatures can be below 0°, leave the appliance for 24 hours at ambient temperature before starting it.

6

Image 6

Contents Lavamat Turbo Electronic Dear customer Contents Page Contents Technical data Service Positioning, connection, starting up Safety instructionsGeneral safety Follow the instructions for positioning and connectionChild safety Proper usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialDelay Start button START/PAUSE buttonDrying Time button Programme Option buttonsPrewash Display Programme progress displayCancelling a programme Altering a programme which is runningOpening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels Cotton 60Delicates 40 Detergents and additives Garments not suitable for drying Preparing the drying cycleLoad Sort of laundryModification of the drying time Drying symbols on garment labelsDuration of the drying cycle Fibre residueHow to dry Additional dryingDrying only Max. load How to wash Load the laundryAdd detergent and additive Selection of the desired options Selection of the spin speed or Rinse Hold optionSelection of the Delay Start option Selection of the Extra Rinse optionStarting the programme At the end of the programmeAutomatic washing and drying NON-STOP programmeProgramme chart Wash programmesConsumption Special programmesDescrip TionMax. load Spin speed Drying time Mins DryingDegree of drying 1200Consumption data for drying Max Water Energy Duration Load Litres KWh MinutesAfter each wash Cleaning and maintenancePeriodical cleaning Exterior Detergent dispenser drawerDoor seal Drain pumpFrost precautions Water inlet filterEmergency emptying out Troubleshooting Problem Possible cause SolutionSomething not working? Problem Possible cause SolutionNoisy Feet have not been Problem Possible cause E10Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Front view and side viewRear view Installation UnpackingPositioning LevellingWater inlet Water drainage