How to wash
Starting the programme
1. Check that the water tap is open. 2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the programme will start at the end of the
countdown.
If the door light is red and flashing at the start of the pro- gramme it indicates that the door is open. Close the door and press the START/PAUSE button again.
If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry, to modify or cancel the delay time.
•Load other laundry: press the START/PAUSE button. Open the door. Load the laundry. Close the door and press the START/PAUSE button again.
•Modify or cancel the delay time: press the START/PAUSE button.
Press the DELAY START button until the time required appears on the display, or 0h, if you wish to cancel it. Press the START/ PAUSE button again.
Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on.
PREWASH WASH
RINSES
EXTRA
RINSE
SPIN
DRYING END
Display
The time to the end of the programme decreases minute by minute and appears on the display.
At the end of the programme
The machine stops automatically. A zero appears on the display. An
acoustic signal is clearly audible. The light (END) comes on in the programme progress display.
28