AEG 12710 manual Cancelling a programme, Altering a programme which is running

Page 16

Description of the appliance

Cancelling a programme

To cancel a programme which is running, turn the programme selector dial to the RESET O position.

Warning! After a programme which ends with water in the drum (RINSE HOLD option ), turn the selector dial first to O and then to the DRAIN programme “C”.

Altering a programme which is running

To alter a programme, first set the machine to PAUSE by pressing the

START/PAUSE button .

Any function can be modified before the machine starts it. After select- ing the new option press the START/PAUSE button again to re-start the selected programme.

To modify the selected programme turn the programme selector dial to O and then choose a new programme.

The water is not emptied out and after pressing the START/PAUSE but- ton again the machine restarts with the newly selected programme.

Opening the door after the programme has started

To open the door set the machine to PAUSE by pressing the START/PAUSE button.

The door can be opened if:

•the machine is not already heating or drying;

•the water level is not above the bottom edge of the door;

•the drum is not turning.

The light (DOOR) on the control panel indicates if the door can be opened:

•green light: the door can be opened;

•unlit light: the door cannot be opened;

•flashing red light: the door is open.

16

Image 16

Contents Lavamat Turbo Electronic Dear customer Contents Page Contents Technical data Service Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connectionChild safety Proper useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialDelay Start button START/PAUSE button Drying Time button Programme Option buttonsPrewash Display Programme progress displayAltering a programme which is running Cancelling a programmeOpening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundrySort of laundry Approximate Dry weights Types of fabric and care labelsCotton Cotton 60Delicates 40 Detergents and additives Preparing the drying cycle LoadGarments not suitable for drying Sort of laundryDrying symbols on garment labels Duration of the drying cycleModification of the drying time Fibre residueAdditional drying How to dryDrying only Max. load Load the laundry How to washAdd detergent and additive Selection of the desired options Selection of the spin speed or Rinse Hold optionSelection of the Delay Start option Selection of the Extra Rinse optionStarting the programme At the end of the programmeAutomatic washing and drying NON-STOP programmeProgramme chart Wash programmesSpecial programmes DescripConsumption TionDrying Degree of dryingMax. load Spin speed Drying time Mins 1200Consumption data for drying Max Water Energy Duration Load Litres KWh MinutesCleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawerDoor seal Drain pumpWater inlet filter Frost precautionsEmergency emptying out Problem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause SolutionNoisy Feet have not been Problem Possible cause E10Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Dimensions of the applianceRear view Installation UnpackingLevelling PositioningWater inlet Water drainage