AEG 1271 manual Something not working?, Troubleshooting, Problem Possible cause Solution

Page 37

Something not working?

If, during the spin cycle, the machine makes an unusual whistling noise, different from the noise made by tradi- tional washing machines, this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the instructions below.

If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the call-out will be charged even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

-E00: problem with the water supply

-E10: problem with water draining

-E20: door open

Once the problem has been eliminated, press the START/PAUSE but- ton to restart the programme. If after all checks, the problem persists, contact your local AEG Service Force Centre.

Problem		Possible cause	Solution


		The ON/OFF button	Depress the button.
		has not been depressed.
		The main electrical fuse	Replace the fuse.
		has blown.
		The door is not properly	Close the door; the click
The machine does not work		closed (E20).	of the lock should be heard.
		The plug is not connected.	Insert the plug.
		The START button has not	Press the button.
		been pressed.
		The DELAY START	Check the selected delay on
		option has been selected.	the display.

37

Image 37

Contents ÖKO-LAVAMAT 1271 T Turbo Dear customer Contents Programme charts washing Contents Technical data Service General safety Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connectionProper use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washer-dryer Front view Detergent drawer Control panel Adjustable feetDoor Programme selector dial C D F G H J KON/OFF button Delay Start buttonMains-on light START/PAUSE buttonProgramme Option buttons Drying Time buttonPrewash Programme progress display DisplayAltering a programme which is running Cancelling a programmeOpening the door after the programme has started Set the machine to Pause by pressing the START/PAUSE buttonBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Sort of laundry Approximate Dry weightsCotton Cotton 40Woollens and particularly delicate items Delicates 40Detergents and additives Load Preparing the drying cycleGarments not suitable for drying As a dryer, the machine works on the condensation principleDuration of the drying cycle Drying symbols on garment labelsModification of the drying time Fibre residueAutomatic washing and drying NON-STOP programme Additional dryingSwitching the machine on How to washLoad the laundry Add detergent and additiveSelection of the spin speed Selection of the desired wash programmeSelection of the STAIN, Prewash or Quick OptionStarting the programme Selection of the Delay Start optionSelected programme will appear on the display At the end of the programme Automatic washing and drying How to dryDrying only NON-STOP programmeWash programmes Programme chartWash Temp Fabrics Additional Max Consumption FunctionsType Special programmesMax Consumption Laundry To empty only press1200 DryingDegree of drying Consumption data for dryingMax Water Energy Duration Periodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerWater inlet filter Drain filterPull out the filter Emergency emptying out Frost precautionsProblem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemNoisy Feet have not been E00 DistributedIf grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionRear view Dimensions of the applianceUnpacking InstallationLevelling PositioningCarefully level by screwing Water drainage Water inletEnd of the drain hose can be positioned in three ways Directly into aPermanent connection Electrical connectionConnect the machine to an earthed socket