AEG 1271 manual Distributed, E00

Page 40

Something not working?

Problem

 

Possible cause

 

Solution

 

 

 

 

 

Spinning starts late or the machine does not spin

The machine will not dry or the laundry is not dry enough

The unbalance detection

If the laundry is not evenly

device that prevents

distributed inside the drum

excessive vibration during

at the beginning of the

spinning has cut in.

spin cycle, the machine

 

detects this and tries to

 

redistribute it more evenly

 

by means of a few drum

 

rotations.

 

Only when the laundry is

 

more evenly distributed

 

will the spin cycle be

 

performed, at a lower speed,

 

if the laundry is not evenly

 

distributed.

 

If, after about 15 minutes,

 

the laundry is still tangled,

 

the machine will not spin.

 

Therefore, if the laundry is

 

still wet at the end of the

 

cycle, it is advisable to

 

redistribute it manually

 

inside the drum and to

 

select the spin programme

 

again.

 

 

 

 

The water tap is not open

Open the water tap.

(E00).

 

The drain filter is clogged.

Clean the filter.

The drying time has not

Select the drying time.

been selected.

 

An appropriate drying time

Select the appropriate

has not been chosen.

drying time suitable for the

 

required degree of drying,

 

according to the type of

 

fabric (cottons or synthetics).

There is too much laundry

Reduce the load.

inside the appliance.

 

 

 

40

Image 40
Contents ÖKO-LAVAMAT 1271 T Turbo Dear customer Contents Programme charts washing Contents Technical data Service Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connectionChild safety Proper useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washer-dryer Front view Detergent drawer Control panel Adjustable feetDoor C D F G H J K Programme selector dialDelay Start button ON/OFF buttonMains-on light START/PAUSE buttonDrying Time button Programme Option buttonsPrewash Display Programme progress displayCancelling a programme Altering a programme which is runningOpening the door after the programme has started Set the machine to Pause by pressing the START/PAUSE buttonDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundrySort of laundry Approximate Dry weights Types of fabric and care labelsCotton Cotton 40Delicates 40 Woollens and particularly delicate itemsDetergents and additives Preparing the drying cycle LoadGarments not suitable for drying As a dryer, the machine works on the condensation principleDrying symbols on garment labels Duration of the drying cycleModification of the drying time Fibre residueAdditional drying Automatic washing and drying NON-STOP programmeHow to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the spin speedSelection of the STAIN, Prewash or Quick OptionStarting the programme Selection of the Delay Start optionSelected programme will appear on the display At the end of the programme How to dry Automatic washing and dryingDrying only NON-STOP programmeProgramme chart Wash programmesWash Temp Fabrics Additional Max Consumption FunctionsSpecial programmes TypeMax Consumption Laundry To empty only pressDrying 1200Degree of drying Consumption data for dryingMax Water Energy Duration Cleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawerWater inlet filter Drain filterPull out the filter Frost precautions Emergency emptying out Problem Possible cause Solution Troubleshooting Something not working? Problem Possible cause SolutionNoisy Feet have not been Distributed E00Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Rear viewInstallation UnpackingLevelling PositioningCarefully level by screwing Water inlet Water drainageEnd of the drain hose can be positioned in three ways Directly into aPermanent connection Electrical connectionConnect the machine to an earthed socket