AEG 1271 manual Positioning, Levelling, Carefully level by screwing

Page 47

Installation

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc.

Before placing it on small tiles, apply a rubber coating.

Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.

If it is impossible to avoid positioning the machine next to a gas cooker or coal-burning stove, an insulating panel (85x57 cm) covered with aluminium foil on the side facing the cooker or stove, must be inserted between the two appliances;

The machine must not be installed in rooms where the temperature can drop below 0.

The water inlet hose and the drain hose must not be kinked.

Please ensure that when the appliance is installed, it is easily accessi- ble for the engineer in the event of a breakdown.

Levelling

Carefully level by screwing the

adjustable feet in or out. Never place cardboard, wood or similar

materials under the machine to compensate for

any unevenness in the floor.

After having levelled the machine, tighten the lock nuts.

47

Image 47
Contents ÖKO-LAVAMAT 1271 T Turbo Dear customer Contents Programme charts washing Contents Technical data Service Follow the instructions for positioning and connection Safety instructionsGeneral safety Positioning, connection, starting upProper use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washer-dryer Door Adjustable feetFront view Detergent drawer Control panel Programme selector dial C D F G H J KSTART/PAUSE button Delay Start buttonON/OFF button Mains-on lightProgramme Option buttons Drying Time buttonPrewash Programme progress display DisplaySet the machine to Pause by pressing the START/PAUSE button Cancelling a programmeAltering a programme which is running Opening the door after the programme has startedBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleCotton 40 Sort of laundry Approximate Dry weightsTypes of fabric and care labels CottonWoollens and particularly delicate items Delicates 40Detergents and additives As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying timeAutomatic washing and drying NON-STOP programme Additional dryingAdd detergent and additive How to washSwitching the machine on Load the laundryOption Selection of the desired wash programmeSelection of the spin speed Selection of the STAIN, Prewash or QuickSelected programme will appear on the display Selection of the Delay Start optionStarting the programme At the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying onlyFunctions Programme chartWash programmes Wash Temp Fabrics Additional Max ConsumptionTo empty only press Special programmesType Max Consumption Laundry1200 DryingMax Water Energy Duration Consumption data for dryingDegree of drying Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each washPull out the filter Drain filterWater inlet filter Emergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Possible cause Solution Possible cause Solution ProblemNoisy Feet have not been E00 DistributedWhite residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionRear view Dimensions of the applianceUnpacking InstallationCarefully level by screwing PositioningLevelling Directly into a Water inletWater drainage End of the drain hose can be positioned in three waysConnect the machine to an earthed socket Electrical connectionPermanent connection