AEG 1271 manual Installation, Unpacking

Page 46

Installation

Unpacking

All transit bolts and packing must be removed before using the appli- ance.

Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.

Remove the polystyrene block from the bottom of the machine and release the two plastic bags by removing the adhesive strip.

2 1

Carefully remove

the right-hand bag (1) then the left-hand bag (2) by pulling them towards the centre of the machine.

Set the machine

upright and remove the two remaining bolts from the back.

Pull out the three plastic spacers from the holes into which the

bolts were fitted.

Plug the open holes with the plugs which you will find in the plastic bag containing the instruction booklet.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

Image 46

Contents ÖKO-LAVAMAT 1271 T Turbo Dear customer Contents Programme charts washing Contents Technical data Service Positioning, connection, starting up Safety instructionsGeneral safety Follow the instructions for positioning and connectionChild safety Proper usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Front view Detergent drawer Control panel Adjustable feetDoor C D F G H J K Programme selector dialMains-on light Delay Start buttonON/OFF button START/PAUSE buttonDrying Time button Programme Option buttonsPrewash Display Programme progress displayOpening the door after the programme has started Cancelling a programmeAltering a programme which is running Set the machine to Pause by pressing the START/PAUSE buttonDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels Cotton 40Delicates 40 Woollens and particularly delicate itemsDetergents and additives Garments not suitable for drying Preparing the drying cycleLoad As a dryer, the machine works on the condensation principleModification of the drying time Drying symbols on garment labelsDuration of the drying cycle Fibre residueAdditional drying Automatic washing and drying NON-STOP programmeLoad the laundry How to washSwitching the machine on Add detergent and additiveSelection of the STAIN, Prewash or Quick Selection of the desired wash programmeSelection of the spin speed OptionStarting the programme Selection of the Delay Start optionSelected programme will appear on the display At the end of the programme Drying only How to dryAutomatic washing and drying NON-STOP programmeWash Temp Fabrics Additional Max Consumption Programme chartWash programmes FunctionsMax Consumption Laundry Special programmesType To empty only pressDrying 1200Degree of drying Consumption data for dryingMax Water Energy Duration After each wash Cleaning and maintenancePeriodical cleaning Exterior Detergent dispenser drawerWater inlet filter Drain filterPull out the filter Frost precautions Emergency emptying outProblem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause SolutionNoisy Feet have not been Distributed E00Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Rear viewInstallation UnpackingLevelling PositioningCarefully level by screwing End of the drain hose can be positioned in three ways Water inletWater drainage Directly into aPermanent connection Electrical connectionConnect the machine to an earthed socket