AEG 1271 manual Problem, Possible cause Solution

Page 38

Something not working?

Problem

The machine does not fill

The machine fills then empties immediately

The machine does not empty and/or does not spin

There is water on the floor

Possible cause	Solution

The water tap is closed (E00).	Open the water tap.
The water inlet hose is	Check the whole length of the
squashed or kinked (E00).	hose and remove the kink.
The small filter of the water	Clean the filter.
inlet hose is clogged (E00).
The door is not properly	Close the door.
closed (E20).
The end of the drain hose	Place the hose at the right
is too low.	height (see Installation
	section).

The drain hose is	Check the whole length of
squashed or kinked (E10).	the hose and remove the
	kink.
The drain filter or the	Clean the filter or check
drain hose are clogged (E10).	the hose.
The RINSE HOLD option	Empty out the water by
(stop with water in drum)	pressing the START button
has been selected.	or selecting the PUMP OUT
	programme.
The laundry is not evenly	Redistribute the laundry
distributed inside the drum.	manually in the drum.

Too much detergent has	Measure detergent
been used.	according to the
	manufacturer’s instructions.
An unsuitable detergent	Use a suitable washing
has been used that	machine detergent.
creates too much foam.
One of the connectors on	Check that the hose is
the water inlet hose is	firmly screwed on at both
leaking.	ends.
The drain filter has not	Fully screw the filter into
been properly screwed on	place.
after cleaning.

38

Image 38

Contents ÖKO-LAVAMAT 1271 T Turbo Dear customer Contents Programme charts washing Contents Technical data Service Positioning, connection, starting up Safety instructionsGeneral safety Follow the instructions for positioning and connectionChild safety Proper usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Door Adjustable feetFront view Detergent drawer Control panel C D F G H J K Programme selector dialMains-on light Delay Start buttonON/OFF button START/PAUSE buttonDrying Time button Programme Option buttonsPrewash Display Programme progress displayOpening the door after the programme has started Cancelling a programmeAltering a programme which is running Set the machine to Pause by pressing the START/PAUSE buttonDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels Cotton 40Delicates 40 Woollens and particularly delicate itemsDetergents and additives Garments not suitable for drying Preparing the drying cycleLoad As a dryer, the machine works on the condensation principleModification of the drying time Drying symbols on garment labelsDuration of the drying cycle Fibre residueAdditional drying Automatic washing and drying NON-STOP programmeLoad the laundry How to washSwitching the machine on Add detergent and additiveSelection of the STAIN, Prewash or Quick Selection of the desired wash programmeSelection of the spin speed OptionSelected programme will appear on the display Selection of the Delay Start optionStarting the programme At the end of the programme Drying only How to dryAutomatic washing and drying NON-STOP programmeWash Temp Fabrics Additional Max Consumption Programme chartWash programmes FunctionsMax Consumption Laundry Special programmesType To empty only pressDrying 1200Max Water Energy Duration Consumption data for dryingDegree of drying After each wash Cleaning and maintenancePeriodical cleaning Exterior Detergent dispenser drawerPull out the filter Drain filterWater inlet filter Frost precautions Emergency emptying outSomething not working? TroubleshootingProblem Possible cause Solution Problem Possible cause SolutionNoisy Feet have not been Distributed E00Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Rear viewInstallation UnpackingCarefully level by screwing PositioningLevelling End of the drain hose can be positioned in three ways Water inletWater drainage Directly into aConnect the machine to an earthed socket Electrical connectionPermanent connection