AEG 1271 manual At the end of the programme

Page 28

How to wash

At the end of the programme

The machine stops automatically and three flashing zeros are displayed.

The END and spin speed pilot lights, as well as the pilot light(s) cor- responding to the selected option(s), stay on.

If the RINSE HOLD option has been selected, the corresponding pilot light on the programme progress display flashes to indicate that the water must be emptied out before opening the door.

The pilot light of the START button flashes and tree flashing zeros are displayed.

Release of the lock is indicated by an audible signal. Switch the machine off by pressing the ON/OFF button . Turn the programme selector dial to RESET O.

Remove the laundry from the drum.

Check that the drum is empty so as to avoid a subsequent wash being damaged by any forgotten items.

Close the water tap.

Leave the door open to prevent the formation of mildew and unpleas- ant smells.

Image 28

Contents ÖKO-LAVAMAT 1271 T Turbo Dear customer Contents Programme charts washing Contents Technical data Service Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connectionChild safety Proper useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washer-dryer Front view Detergent drawer Control panel Adjustable feetDoor C D F G H J K Programme selector dialDelay Start button ON/OFF buttonMains-on light START/PAUSE buttonDrying Time button Programme Option buttonsPrewash Display Programme progress displayCancelling a programme Altering a programme which is runningOpening the door after the programme has started Set the machine to Pause by pressing the START/PAUSE buttonDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundrySort of laundry Approximate Dry weights Types of fabric and care labelsCotton Cotton 40Delicates 40 Woollens and particularly delicate itemsDetergents and additives Preparing the drying cycle LoadGarments not suitable for drying As a dryer, the machine works on the condensation principleDrying symbols on garment labels Duration of the drying cycleModification of the drying time Fibre residueAdditional drying Automatic washing and drying NON-STOP programmeHow to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the spin speedSelection of the STAIN, Prewash or Quick OptionStarting the programme Selection of the Delay Start optionSelected programme will appear on the display At the end of the programme How to dry Automatic washing and dryingDrying only NON-STOP programmeProgramme chart Wash programmesWash Temp Fabrics Additional Max Consumption FunctionsSpecial programmes TypeMax Consumption Laundry To empty only pressDrying 1200Degree of drying Consumption data for dryingMax Water Energy Duration Cleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawerWater inlet filter Drain filterPull out the filter Frost precautions Emergency emptying outProblem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause SolutionNoisy Feet have not been Distributed E00Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Rear viewInstallation UnpackingLevelling PositioningCarefully level by screwing Water inlet Water drainageEnd of the drain hose can be positioned in three ways Directly into aPermanent connection Electrical connectionConnect the machine to an earthed socket