5 Use the operation buttons
aDescription of operation button
Connection between the water inlet hose and the washer
Indicator mode and meaning
Off:
Flashing: indicate the running program
On: indicate the program about to run, or indicate the selected mode
1.Do not take off the water absorption cushion. Please check if the 
cushion is dropped or damaged before each usage. If it happens
please contact our 
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
nut of the water inlet hose
4
3
2
SOAK
WASH
TIME REMAINED(MINUTES)
jointer of the | water absorption |
water inlet valve | cushion. |
Connection between the jointer of the water inlet hose and the water inlet hose
|
|
|
| the jointer of the |
1.Push down the slider. Insert the water inlet hose into the jointer. |
|
|
| water inlet hose |
|
|
|
1
RINSE
SPIN
RESERVE(HOURS LATER)
2 Hang the lock lever to the jointer. Release the slider till a click sound is heard.
Locking level
Slider
WATER
LEVEL
PROCESS
RESERVE
"Process"button
With it you can select one or several processes of soak, wash, rinse and spin.
Check the connection between the jointer of the water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from
"Water level" button
During the standard program,the washing machine can detect the laundries automatically. After detection,it will set the water level to suitable value among 1, 2,3,and 4 automatically.
You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the start/pause button to make new setting.
If save program is selected, it will display water level 2 . When water level 1 is reached in water filling, it will perform washing while filling water.
When water level 2 is reached, it will change to normal washing.
"Reserve" button
The digitron displays remain time before washing is finished (in minutes) Push "reserve" button, the digitron displays the reserve time of washing (in hours). The indicator flashes to indicate that the reserve function is operating.
Push "reserve" button to display the reserve mode.
improper installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then pull of the water inlet hose.
If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.
Locking level 
Slider