Bradley Smoker EXD-2N installation instructions Connecting supply and drain

Express® Deck Lavatory System EXD-Series
EXD-2N	Installation Instructions

Installation Instructions continued . . .

Step 4: Connecting supply and drain

1.Connect the Vernatherm™ Thermostatic Mixing Valve as shown in Figure 5a.

2.Install the drain plug in the drain hole in the bowl (see Figure 5b).

3.Beneath the bowl, install the 1/8" rubber washer and the threaded tailpiece onto the drain plug.

4.Assemble the P-trap by connecting the 1-1/2" tubular pipe to the tailpiece and to the 1-1/2" drain pipe stubbed out of the wall (see Figure 5c).

5.Install the strainer on the drain plug opening inside the bowl using the #8 screw.

	HOT SUPPLY	COLD SUPPLY
		1/2" NPT
		CHECK/STOP
		VALVE
		H
		1/2" FLEXIBLE
		HOSE
		C
	VERNATHERM™	VERNATHERM™
		VALVE
	BRACKET
Figure 5a	#10 SCREW

	#8 SCREW
	BOWL	STRAINER
		1/8"		P-TRAP
		RUBBER		STRAINER
	DRAIN	WASHER
	PLUG
			TAILPIECE
				45˚
	TAILPIECE
	Figure 5b		Figure 5c	FRAME (FRONT)
8		2/9/07		Bradley Corporation • 215-1542 Rev. E; EN 06-915