Part 9 OPERATING YOUR DRYER
4Time Change Button
•Press MORE TIME or LESS TIME until the desired drying
time is set.
Note
Time change button is available only with Manual Dry, Time Dry and Rack Dry programs.
5LED Display
1
2
3
4
1. CHECK FILTER REMINDER
The display will show CHECK FILTER when the dryer is turned on as a reminder to check the filter.
It turns off when the START/PAUSE button is pressed.
!WARNING!
•For better drying performance and safety, clean lint filter every single use.
•Failure to follow these instructions can result in death or fire.
2.Estimated Time Remaining
The display shows the estimated time remaining. In addition to this, if the dryer has some problem, it displays error messages.
3. CYCLE COMPLETION INDICATOR
Shows how much of the current drying cycle has been completed.
4. STATUS/CYCLE DISPLAY
This portion of the display shows the selected cycle, operating status, and special messages. If a cycle has special instructions, they will also be displayed in this area.
6Option Buttons
1. Child Lock
Child Lock can be used to prevent your children from changing options on control panel while the dryer is running.
When Child Lock is enabled, all the buttons will be locked and Child Lock glows.
To enable Child Lock, Press and hold OPTION for 3 seconds, A single beep tone is heard and Child Lock is displayed on the status window.
To disable Child Lock, press and hold OPTION for 3 seconds again.
2. Wrinkle Care
This option helps to prevent wrinkles in your laundry.
When you select the wrinkle free option, the dryer will periodically tumble for up to three hours after the cycle has completed.
You can use this option in case you can not remove laundry immediately after drying is done.
3. Damp Dry Beep
When you select the damp dry beep option, a beep will alert you when your load is approximately 80% dry.
This notice will allow you to remove lightweight items that are dry or other items that you may wish to iron.
2 7