Electrolux TK K2 E user manual Drying cycle complete / removing laundry, After each drying cycle

daily use electrolux 17

Drying cycle complete / removing laundry

Once the drying cycle is complete, END status led is lighting. If the BUZZER Sig- nal button has been pressed, an acoustic signal sounds intermittently for about one minute.

The drying cycles are automatically followed by an anti-crease phase which lasts around 30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. The laundry can be re- moved at any time during the anti-crease phase. (The laundry should be taken out towards the end of the anti-crease phase at the latest to prevent creases from forming.)

1.Open door.

2.Before removing the laundry, remove fluff from the micro-fine filter. It is best to use a damp hand for this purpose. (See “Care and cleaning” chapter.)

3.Remove laundry.

4.Turn the programme selector to OFF Aus.

After each drying cycle:

-Clean the micro-fine filter and fine filter

-Drain the condensed water container (See chapter “Care and cleaning”.)

5.Close the door.