Electrolux TK K2 E user manual Care and cleaning electrolux

Page 21

care and cleaning electrolux 21

If the condensate tank is full, an active programme will break off automatically and the warning led light up. In order to continue the programme, the condensate tank must first be emptied.

The condensate is not suitable for drinking or for preparing foodstuffs.

1.

2

 

1

 

Take out drawer containing condensed water container completely 1 and pull up the condensed water container’s drainage pipe as far as it will go 2.

2.

Pour condensed water out into a basin or similar receptacle.

3.Slide outlet connections in and refit condensate tank.

If the programme has been interrupted as a result of the condensate tank being full: Press the Start/Pause button to continue the drying cycle.

The condensate tank has a volume of approx. 3.6 litres. This is sufficient for around 6 kg of laundry which has previously been spun at 1000 revolutions/ minute.

Image 21
Contents Condenser Dryer We were thinking of you Welcome to the world of Electrolux Service Important safety information Important safety information electroluxGeneral safety Electrolux important safety information Use Child safetyElectrolux product description Product descriptionBefore first use Control panelSorting and preparing laundry Control panel electroluxElectrolux sorting and preparing laundry Programme overview electrolux Programme overviewElectrolux Programme overview Additiona Daily use Switching machine onOpening loading door / loading laundry Selecting the programmeBuzzer function Delicate Schon functionDelay Start Zeitvorwahl function Starting the programme Changing programmeLaundry and drum can become hot. Risk of burns After each drying cycle Drying cycle complete / removing laundryCare and cleaning Cleaning fluff filterElectrolux care and cleaning Clean the entire filter area Care and cleaning electroluxEmptying the condensate tank Cleaning the door sealCare and cleaning electrolux Cleaning heat exchanger Cleaning the drum Do not use abrasives or steel wool to clean the drumNever operate the dryer without the heat exchanger Clean operating screen and housing What to do if Troubleshooting by yourselfElectrolux what to do if Machine settings Machine settings electroluxSetting Buzzer Signal perma- nent on/off Implementation Electrolux machine settings Water hardness When using an external drain for the condensed water Electrolux technical data Technical dataConsumption values Loading volume in kg Energy consumption KWhHints for test institutes Consumption values electroluxInstallation Electrolux installationAppliance positioning Removing transport safety packaging Installation electroluxElectrical connection Before changing the door stop, disconnect the mains plug Changing door stopInstallation electrolux Environment Special accessoriesPackaging material Electrolux environmentEnvironment electrolux Old applianceEnvironmental tips Pre-drainingDrying cycle Service Electrolux Electrolux Electrolux Page 136901420-01-15102007