installation electrolux 33
Removing transport safety packaging
Before use all parts of the transport packaging must be removed.
1.Open loading door
2.Pull off adhesive strips from inside machine on top of drum.
3.
Remove foil hose and polystyrene padding from the machine.
Electrical connection
Details on mains voltage, type of current and the fuses required should be taken from the type plate. The type plate is fitted near the loading aperture (see “Product description” chapter).
The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Center.