Electrolux TK K2 E user manual When using an external drain for the condensed water

Page 29

machine settings electrolux 29

Emptying water tank - warning message perma- nent off

When using an external drain for the condensed water.

1.Turn the programme selector to any pro- gramme.

2.Press simultaneously the BUZZER Signal and DELAY START Zeitvorwahl buttons and hold down for approx. 5 seconds.

The current setting is shown by lighting EMP- TYING WATER TANK Behälter diode:

EMPTYING WATER TANK Behälter diode flashes - warning is permanently off

EMPTYING WATER TANK Behälter diode flashes and becomes steady - led warning is activated

By default the warning led is activated and is lighting always at the end of the drying cycle or during the cycle if the water container is full.

Image 29
Contents Condenser Dryer We were thinking of you Welcome to the world of Electrolux Service General safety Important safety informationImportant safety information electrolux Electrolux important safety information Use Child safetyElectrolux product description Product descriptionBefore first use Control panelSorting and preparing laundry Control panel electroluxElectrolux sorting and preparing laundry Programme overview electrolux Programme overviewElectrolux Programme overview Additiona Daily use Switching machine onOpening loading door / loading laundry Selecting the programmeBuzzer function Delicate Schon functionDelay Start Zeitvorwahl function Laundry and drum can become hot. Risk of burns Starting the programmeChanging programme After each drying cycle Drying cycle complete / removing laundryElectrolux care and cleaning Care and cleaningCleaning fluff filter Clean the entire filter area Care and cleaning electroluxEmptying the condensate tank Cleaning the door sealCare and cleaning electrolux Cleaning heat exchanger Never operate the dryer without the heat exchanger Cleaning the drumDo not use abrasives or steel wool to clean the drum Clean operating screen and housing What to do if Troubleshooting by yourselfElectrolux what to do if Setting Buzzer Signal perma- nent on/off Implementation Machine settingsMachine settings electrolux Electrolux machine settings Water hardness When using an external drain for the condensed water Electrolux technical data Technical dataConsumption values Loading volume in kg Energy consumption KWhHints for test institutes Consumption values electroluxAppliance positioning InstallationElectrolux installation Electrical connection Removing transport safety packagingInstallation electrolux Before changing the door stop, disconnect the mains plug Changing door stopInstallation electrolux Environment Special accessoriesPackaging material Electrolux environmentEnvironment electrolux Old applianceDrying cycle Environmental tipsPre-draining Service Electrolux Electrolux Electrolux Page 136901420-01-15102007