Electrolux TK K2 E user manual Cleaning heat exchanger

Page 22

22 electrolux care and cleaning

The condensate can be used as distilled water, e.g. for steam ironing. However first filter the condensate (e.g. with a coffee filter) to remove any residue and small pieces of fluff.

Cleaning heat exchanger

If the warning led is lighting, the heat exchanger needs to be cleaned.

Operating when the heat exchanger is blocked with fluff can damage the dryer. This also increases energy consumption.

1. Open door.

2.

Open door in plinth. To do this, press the release button on the bottom of the door aperture and open the door in the plinth to the left.

3.Clean fluff from the inside of the door and the heat exchanger front chamber. Wipe the door seal with a damp cloth.

4.

Turn both lock washers inwards.

Image 22
Contents Condenser Dryer We were thinking of you Welcome to the world of Electrolux Service Important safety information electrolux Important safety informationGeneral safety Electrolux important safety information Child safety UseProduct description Electrolux product descriptionSorting and preparing laundry Control panelBefore first use Control panel electroluxElectrolux sorting and preparing laundry Programme overview Programme overview electroluxElectrolux Programme overview Additiona Opening loading door / loading laundry Switching machine onDaily use Selecting the programmeDelicate Schon function Buzzer functionDelay Start Zeitvorwahl function Changing programme Starting the programmeLaundry and drum can become hot. Risk of burns Drying cycle complete / removing laundry After each drying cycleCleaning fluff filter Care and cleaningElectrolux care and cleaning Care and cleaning electrolux Clean the entire filter areaCleaning the door seal Emptying the condensate tankCare and cleaning electrolux Cleaning heat exchanger Do not use abrasives or steel wool to clean the drum Cleaning the drumNever operate the dryer without the heat exchanger Clean operating screen and housing Troubleshooting by yourself What to do ifElectrolux what to do if Machine settings electrolux Machine settingsSetting Buzzer Signal perma- nent on/off Implementation Electrolux machine settings Water hardness When using an external drain for the condensed water Technical data Electrolux technical dataHints for test institutes Loading volume in kg Energy consumption KWhConsumption values Consumption values electroluxElectrolux installation InstallationAppliance positioning Installation electrolux Removing transport safety packagingElectrical connection Changing door stop Before changing the door stop, disconnect the mains plugInstallation electrolux Packaging material Special accessoriesEnvironment Electrolux environmentOld appliance Environment electroluxPre-draining Environmental tipsDrying cycle Service Electrolux Electrolux Electrolux Page 136901420-01-15102007