28 electrolux machine settings
Water hardness
Water contains, a varia- ble quantity of limestone and mineral salts of which quantities vary ac- cording to geographical locations thus varying its conductivity values. Relevant variations of the conductivity of the water compared to those pre- fixed by the factory could slightly influence the residual humidity of the laundry at the end of the cycle. Your dryer allows you to regulate the sensitivity of the drying sensor based on conductivity values of the water.
1.Turn the programme selector to any pro- gramme.
2.Press simultaneously the DELICATE Schon and Start/Pause buttons and hold down for approx. 5 seconds. The current setting is shown by lighting status diode:
–EMPTYING WATER TANK Behälter diode - low conductivity <300 micro S/cm
–FILTER Sieb diode - medium conductivity
–CONDENSER Wärmetauscher diode - high conductivity >600 micro S/cm
3.Press the Start/Pause button sequentially until you set desired level.
4.To memorize setting press simultaneously the DELICATE Schon and Start/Pause buttons or turn knob to OFF Aus position