Electrolux LAVATHERM 57810 manual Emptying the water reservoir

Page 18

Emptying the water reservoir

Empty water reservoir after every drying cycle.

If the water reservoir is full, an active programme will be interrupted automatically and the EMPTY WATER display will light up. In order to continue the programme, the water reservoir must be emptied.

1 Warning! The condensed water is not suitable for drinking or for pre- paring foodstuffs.

1.Take out drawer containing water

reservoir completely (1) and pull up the water reservoir’s drainage pipe as far as it will go (2).

2. Pour condensed water out into a sink or other suitable container.

3. Slide outlet connections in and re- fit water reservoir.

If the programme has been inter- rupted as a result of the water res- ervoir being full:

Press the START/PAUSE button to continue the drying cycle.

3 The water reservoir has a volume of approx. 4 litres. This is sufficient for around 6kg of laundry which has previously been spun at 800 revolu- tions/minute.

3 The condensed water can be used as distilled water, e.g. for steam iron- ing. However first filter it (e.g. with a coffee filter) to remove any resi- due and small pieces of fluff.

18

Image 18
Contents Lavatherm Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety Prior to initial start upIntended use Disposal Child safetyGeneral safety Packaging materialEnvironmental tips Old appliancePre-draining Drying cycle Description of machine Operating screenSorting laundry Before the first drying cycleSorting and preparing laundry Preparing laundryAdditional Programme Application/properties Care SymbolsOverview of programmes FunctionsApplication/properties Care Symbols 30 MIN 1kgOpening loading door / filling laundry Switching machine on / switching light onDrying Selecting the programmeSelecting additional functions IntensitySetting time delay Starting the programmeChanging programme Removing laundry or loading laundry when necessary Drying cycle complete / removing laundryCleaning and maintenance Cleaning lint filterCleaning the door seal Clean the entire filter areaEmptying the water reservoir Empty water reservoir after every drying cycleCleaning heat exchanger Troubleshooting by yourself Cleaning the drumClean operating screen and housing Problem Possible cause RemedyProgramme Time Changing bulb for interior light Programming options Objective ImplementationProgramme Technical dataConsumption values EnergyInstallation safety instructions Removing transport safety packagingElectrical connection Permanent Connection Door reversal instructions Special accessories Intermediate installation kits for stacked washer and dryerInstallation kit for external condensate drain Warranty conditions Great BritainFor Customer Service in the Republic 0870 5 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG