Electrolux LAVATHERM 57810 What to do if …, Cleaning the drum, Clean operating screen and housing

Page 20
Caution! Do not use abrasives or steel wool to clean the drum.

Cleaning the drum

1

3 Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. The laundry is damper than expect- ed when removed from the dryer.

Use a damp cloth, which has been soaked in water and a little vinegar, to wipe the inside of the drum and drum ribs.

Clean operating screen and housing

1 Caution! Do not use furniture cleaners or aggressive cleaning agents to clean the machine.

Use a damp cloth to wipe down the operating screen and housing.

What to do if …

Troubleshooting by yourself

If, during operation, the error code (E plus number or letter) appears on the multi-display: Switch the machine off and on again. Reset pro- gramme. Press the START/PAUSE button

If the error is still displayed, please inform your local Service Force Cen- tre and quote the error code.

Problem

Possible cause

Remedy

 

Mains plug is not plugged in

Plug in at mains socket. Check

 

or fuse is not working cor-

fuse in fuse box (domestic in-

 

rectly.

stallation).

Dryer does not work.

Loading door is open.

Close loading door.

 

 

 

 

 

Have you pressed the START/

Press the START/PAUSE button

 

PAUSE button?

again.

 

 

 

20

Image 20
Contents Lavatherm Following symbols are used in the text Dear CustomerContents Installation and connection instructions Intended use SafetyPrior to initial start up Child safety General safetyDisposal Packaging materialPre-draining Drying cycle Environmental tipsOld appliance Description of machine Operating screenBefore the first drying cycle Sorting and preparing laundrySorting laundry Preparing laundryProgramme Application/properties Care Symbols Overview of programmesAdditional FunctionsApplication/properties Care Symbols 30 MIN 1kgSwitching machine on / switching light on DryingOpening loading door / filling laundry Selecting the programmeSelecting additional functions IntensityChanging programme Setting time delayStarting the programme Removing laundry or loading laundry when necessary Drying cycle complete / removing laundryCleaning and maintenance Cleaning lint filterCleaning the door seal Clean the entire filter areaEmptying the water reservoir Empty water reservoir after every drying cycleCleaning heat exchanger Cleaning the drum Clean operating screen and housingTroubleshooting by yourself Problem Possible cause RemedyProgramme Time Changing bulb for interior light Programming options Objective ImplementationTechnical data Consumption valuesProgramme EnergyInstallation safety instructions Removing transport safety packagingElectrical connection Permanent Connection Door reversal instructions Installation kit for external condensate drain Special accessoriesIntermediate installation kits for stacked washer and dryer Warranty conditions Great BritainCustomer Care For Customer Service in the Republic0870 5 929 AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG