Programming options

Objective	Implementation

1.Turn the programme selector to any programme.

Permanently programme 2. Press the AUDIBLE SIGNAL button and hold down for

in the audible signal	approx. 5 seconds.
which reminds you that	A brief signal sounds several times. The AUDIBLE SIGNAL
the programme is com-	display flashes several times.
plete.	The setting is permanently programmed.
	The setting is cancelled as described under 1 and 2.
	1. Turn the programme selector to any programme.
	2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at the
Adjust “level of dryness”	same time and hold down for approx. 5 seconds.
detection:	The current setting appears on the multi-display:
If the laundry is slightly	– C0: Setting for drier laundry
drier or slightly damper	– C1: Standard setting
at the end of the pro-	– C2: Setting for damper laundry
gramme than with the	3. Press the START/PAUSE button until the setting required
standard setting.	appears on the multi-display.
	4. Turn the programme selector to OFF.
	The setting is permanently programmed.
	1. Turn the programme selector to any programme.
To deactivate the EMPTY	2. Press the DOOR and SPECIAL CARE buttons at the same
To deactivate the EMPTY	time and hold down for approx. 5 seconds. The multi-
WATER display when us-	display briefly displays ”0”
ing an external drain for	The EMPTY WATER display is permanently deactivated.
the condensed water.	The setting is cancelled as described under 1 and 2; the
	multi-display however briefly displays ”1” (rather than
	”0”).

Objective