Electrolux LAVATHERM 57810 manual Door reversal instructions

Door reversal instructions

1 Warning! The door may only be reversed by a specialist.

If necessary, please contact your local Service Force Centre.

Warning! Before reversing the door, disconnect the mains plug; with a permanent connection: remove the fuse.

1.Open door.

2. Unscrew hinge A from the front of the machine and take off the load- ing door.

3.Carefully pry off cover plates B and

C. To do this, insert a thin screw- driver into the slots as shown in the illustration, press downwards slightly and pry out the cover plates.

4. Unfasten locking block D from the snap-on fixture, take out and rein- sert on the other side having rotat- ed the block through 180°.

5. Unscrew hinge A from the loading door, rotate through 180°, reinsert on the opposite side and screw down.

6.Reinsert cover plates B and C on the opposite site having first rotated them through 180°.

7. Unscrew cover plates E from the front of the machine, rotate through 180°, screw on the opposite side.

8. Unscrew door lock F, push down slightly and remove from the front of the machine.

9.Disconnect cable connector from door lock F.

10. Press snap-in button G in and down, press cover down slightly and remove from front of the ma- chine.

11. Disconnect cable connector from cover G.

28