Electrolux LAVATHERM 57810 Special accessories, Installation kit for external condensate drain

Page 29

12.Change door lock F over to the opposite side, insert the cable connector and screw down the door interlock.

13.On the other side, insert the cable connector in cover G, insert cover and allow snap-in button to lock into place.

14.Insert door and hinges into recesses on the front of the machine and screw down.

15.Once the door has been reversed, check the function of the DOOR but- ton.

Note regarding contact protection: The machine is only secure for operations again once all plastic parts have been inserted.

Special accessories

The following special accessories are available from your Service Force Centre or your specialist dealer:

Intermediate installation kits for stacked washer and dryer:

These intermediate installation kits can be used to arrange the dryer and an automatic AEG-Electrolux washing machine (60cm wide, front loading) as a space-saving washer/dryer stack. The automatic washing machine is at the bottom and the dryer is at the top.

Two versions can be supplied:

– without stacker plate	916 019 102
– with extractable stacker plate	916 019 103

Installation kit for external condensate drain

Installation kit (125 122 510) for direct draining of condensate into a basin, siphon, gully, etc. The condensate tank then no longer has to be drained, it must however remain in its intended position in the ma- chine. Refer to the “Programme options” section for how to deactivate the EMPTY WATER display.

Max. displacement height: 1m from the base of the dryer; max. dis-

placement length: 3m

29

Image 29

Contents Lavatherm Dear Customer Following symbols are used in the textContents Installation and connection instructions Intended use SafetyPrior to initial start up General safety Child safetyDisposal Packaging materialPre-draining Drying cycle Environmental tipsOld appliance Operating screen Description of machineSorting and preparing laundry Before the first drying cycleSorting laundry Preparing laundryOverview of programmes Programme Application/properties Care SymbolsAdditional Functions30 MIN 1kg Application/properties Care SymbolsDrying Switching machine on / switching light onOpening loading door / filling laundry Selecting the programmeIntensity Selecting additional functionsChanging programme Setting time delayStarting the programme Drying cycle complete / removing laundry Removing laundry or loading laundry when necessaryCleaning lint filter Cleaning and maintenanceClean the entire filter area Cleaning the door sealEmpty water reservoir after every drying cycle Emptying the water reservoirCleaning heat exchanger Clean operating screen and housing Cleaning the drumTroubleshooting by yourself Problem Possible cause RemedyProgramme Time Changing bulb for interior light Objective Implementation Programming optionsConsumption values Technical dataProgramme EnergyRemoving transport safety packaging Installation safety instructionsElectrical connection Permanent Connection Door reversal instructions Installation kit for external condensate drain Special accessoriesIntermediate installation kits for stacked washer and dryer Great Britain Warranty conditionsCustomer Care For Customer Service in the Republic0870 5 929 AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG