Electrolux 59840 user manual Setting long anti-crease function, Buzzer, Time

Page 17

Daily use 17

Setting long anti-crease function

Press the LONG ANTI-CREASE button. A 90 minute anti-crease phase is set. The display now shows the LONG ANTI-CREASE icon

. If this additional function is selected, the anti-crease phase at the end of the drying cycle is lengthened by 60 minutes. The laun- dry can be removed at any time during the anti-crease phase.

Buzzer

The appliance is supplied with the BUZZER function deactivated.

To activate buzzer press BUZZER button.

The button is used to switch the function on or off. When the function is active, the BUZ- ZER symbol appears in the display.

The buzzer sounds or plays a tune during:

–cycle end

–anti-crease phase and when phase starts or ends

–cycle interruption by a warning

–alarm

Time

To select the programme duration after set- ting the TIME programme. You can select a programme duration from 10 mins to 3 hrs in 10-minute steps.

1. Turn the programme knob to the TIME programme. The blinking 10' above TIME button is on.

2.Press the TIME button repeatedly until the

desired programme duration is shown in the display, e.g. 20 for a programme of 20 minutes.

Image 17

Contents Lavatherm Dear Customer Contents European Guarantee Guarantee/Customer ServiceGeneral safety Important safety informationInstallation Use Child safetyProduct description Control panel What is shown in the displayBefore first use Sorting laundry Sorting and preparing laundrySorting by care label. The care labels mean Preparing laundryTime Programme chartMixed BED Linen Viscose Jeans Wool Daily use Switching machine on / switching light onOpening loading door / loading laundry Selecting the programmeSetting the pre-drainage spin speed Setting dryness levelPress the Dryness button repeatedly until If the washing in the washing machine wasTime Setting long anti-crease functionBuzzer Setting child lock Setting delay timerPress the Start Pause button. The pro- gramme is started Starting the programmeChanging programme Close the door Drying cycle complete / removing laundryOpen door After cleaning do not forget to put it back Care and cleaningCleaning fluff filter Clean the entire filter area Empty condensate tank after every drying cycle Cleaning the door sealEmptying the condensate tank Cleaning heat exchanger filter Care and cleaning Open loading door Cleaning the drum Clean operating screen and housing What to do if Troubleshooting by yourselfWhat to do if Changing the bulb for interior lightingWhat to do if Replace defective bulb Screw cover back down Buzzer permanent off Machine settingsUse Domestic Permissible ambient temperature + 5C to + 35C Technical dataCotton cycle with nominal and half load Consumption valuesHints for test institutes Appliance positioning InstallationTransporting the appliance Remove foil hose and polystyrene padding from the machine Removing transport safety packagingElectrical connection Changing door stop Permanent connectionIntermediate installation kit for stacked washer and dryer Special accessoriesInstallation Old appliance EnvironmentPackaging material Environmental tips Standard guarantee conditions Guarantee/Customer ServiceService and Spare Parts ExclusionsCustomer Care 01 4090751 Email service.eid@electrolux.ieEuropean Guarantee Service Deutschland +49 Schweiz Suisse Svizzera 125989520-01-14012008